{ "store": "Wine Rack Company", "website": "https://winerack.net.nz", "currency": "NZD", "count": 19, "products": [ { "id": "bamboo-wine-rack-12-bottle-3-tier", "sku": "bamboo-wine-rack-12-bottle-3-tier", "title": "Bamboo Wine Rack 12 Bottle 3 Tier Countertop Stand", "slug": "bamboo-wine-rack-12-bottle-3-tier", "price": 98.99, "currency": "NZD", "availability": "in_stock", "category": "countertop-wine-racks", "category_label": "Countertop Wine Racks", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "1.1 kg", "images": [ "https://winerack.net.nz/dropship-images/countertop-wine-racks/bamboo-wine-rack-12-bottle-3-tier/main-bamboo-wine-rack-12-bottle-3-tier.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/bamboo-wine-rack-12-bottle-3-tier/bamboo-wine-rack-12-bottle-3-tier-2.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/bamboo-wine-rack-12-bottle-3-tier/bamboo-wine-rack-12-bottle-3-tier-3.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/bamboo-wine-rack-12-bottle-3-tier/bamboo-wine-rack-12-bottle-3-tier-4.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/bamboo-wine-rack-12-bottle-3-tier/bamboo-wine-rack-12-bottle-3-tier-5.jpg" ], "description_short": "Three tiers of wave-cut bamboo hold four 750ml bottles per layer, assemble in minutes with the included hardware, and rest flat on any countertop, sideboard or shelf.", "description": "The pile behind the kettle\n\nWine storage creeps up on people. You buy a couple of bottles for dinner, someone brings one to a barbecue, you grab a case on special because the price was good, and before long there is a cluster of bottles on the bench, a few in a cupboard and one on its side in the fridge door. Nothing is damaged exactly, but nothing is organised either. You cannot see labels, you forget what you own, and the bench feels cluttered.\n\nA countertop wine rack solves a smaller problem than people expect, and that is exactly why it works. It is not about cellaring. It is about getting twelve bottles off the bench surface, lined up where you can read the labels, in a shape that looks deliberate instead of accidental.\n\nHow a three tier rack works\n\nThe design here is simple. Three horizontal shelves sit between two bamboo uprights, and each shelf holds four bottles lying on their sides. Twelve bottles total. The shelves are not flat. They are cut with a wave profile, so each bottle sinks into a shallow dip and stays where you put it.\n\nThat wave is doing more work than it looks. On a flat shelf, pulling one bottle out shifts the weight and the neighbours start to travel. On a wave-cut shelf each bottle has its own seat. You can take the middle bottle out of a row and the other three stay exactly where they were.\n\nLying bottles on their side is also the standard approach for wine with a natural cork. The wine stays in contact with the cork, the cork stays damp, and it keeps its seal. Screw-cap bottles do not care either way, but horizontal storage is still the most space-efficient way to stack them.\n\nWhy bamboo\n\nBamboo has become a common material for kitchen pieces for good reasons. It is light for its strength, it has a tight, even grain, and it takes a finish well. This rack weighs 1.1kg empty, which means you can pick it up with one hand to wipe the bench underneath.\n\nThe finish on this one is paint, which gives the surface some resistance to the splashes and fingerprints that happen in a working kitchen. Care is about as easy as it gets, a dry cloth for dust and a barely damp cloth for anything sticky, dried off straight away.\n\nThe one thing worth knowing about any timber or bamboo product is that it does not like sitting in water. Keep it out of the splash zone beside the sink and off the top of a dishwasher that vents steam, and it will hold up fine.\n\nWho this suits\n\nThis is a good fit if you drink wine regularly rather than collect it. Twelve bottles is roughly a case, which for most households is a few weeks of casual drinking or a solid buffer for entertaining.\n\nIt suits small kitchens particularly well. At 43cm wide and 23.5cm deep the footprint is about the same as a large dish rack, so it fits the end of a bench, a sideboard, a shelf in a butler's pantry or a bar cart. Apartment dwellers tend to get the most out of it because there is no spare floor space for a wine cabinet.\n\nIt also suits anyone who wants their bottles visible. An open rack doubles as display. If you have nice labels, this shows them off. If you prefer bottles hidden, a cupboard rack is a better call.\n\nWho it does not suit: anyone cellaring bottles for years, anyone with magnums or wide sparkling bottles as the bulk of their collection, and anyone with no clear flat surface to put it on. It is a countertop unit with no wall-mount option.\n\nMeasuring before you buy\n\nThis is the step people skip and then regret. Three numbers matter.\n\nWidth is 43cm. Check the clear run of bench, shelf or sideboard you are planning to use, and allow a few centimetres at each end so you are not wedging it in.\n\nDepth is 23.5cm. On a standard kitchen bench that leaves room in front, but on a narrow shelf it can overhang. An overhanging rack holding 15kg of glass is not a good arrangement.\n\nHeight is 27cm. This is the one that catches people out under overhead cupboards. Measure from the bench surface to the underside of the cupboard, and leave enough clearance to actually lift a bottle out and lay it back in, which needs more room than the rack height alone.\n\nLoading it sensibly\n\nLoad from the bottom tier up. Keeping the weight low makes the whole thing more stable, which matters because a full rack carries around 15kg of glass and liquid.\n\nPut the bottles you reach for most on the top tier where they are easiest to grab. Keep anything you are saving on the bottom. If you tend to buy the same wine repeatedly, grouping by type makes the rack easier to read at a glance.\n\nDo not move it while it is loaded. The rack itself is light, which is handy, but a loaded rack has a lot of unsecured weight in it. Unload, move, reload.\n\nAssembly, honestly\n\nIt comes flat-packed and you put it together. The hardware is in the box, and the shelves locate into the uprights so the alignment is largely done for you. Most people finish it in under half an hour.\n\nTwo tips. Lay all the parts out and count them against the list before you start, because finding a missing fitting at the end is far more annoying than finding it at the beginning. And tighten everything gently first, square the frame up, then do the final tighten. Fully tightening one corner before the rest are in place is how you end up with a frame that rocks.\n\nLiving with it\n\nAfter the first week you stop noticing it, which is the goal. Dust it when you dust the bench. Every few months, give the fittings a quick check and nip up anything that has worked loose, which is normal for any assembled furniture that gets handled.\n\nIf you are using it for oil and vinegar instead of wine, wipe the shelf under the spouts occasionally. Oil drips are invisible until they are not.\n\nOne thing worth planning for is light. An open rack leaves bottles exposed to whatever light is in the room, and strong direct sun is hard on wine over months. If the only spot you have is a sunny window, think about rotating stock faster or picking a shadier corner.\n\nGifting it\n\nWine racks are a reliable gift because they are useful without being personal in a risky way. Housewarmings, weddings, retirements and office gift exchanges all work. It flat-packs, so wrapping is easy, and pairing it with a bottle turns it into a complete present without much effort.\n\nThe short version\n\nThis is a twelve bottle bamboo rack, three tiers of four, 43 x 23.5 x 27cm, 1.1kg, countertop only, flat-packed with hardware included. The wave-cut shelves hold bottles still. Care is a dry cloth.\n\nIf you want your everyday bottles organised, visible and off the bench in a compact piece that does not look like storage furniture, it does that job well. If you need to age bottles for years or you want them hidden away, look at a cabinet instead. Measure your space first and the rest is easy.", "llm_summary": "The LQUAN bamboo wine rack is a three tier countertop rack that holds 12 standard 750ml bottles, four per tier. It is made from bamboo with a painted finish and weighs 1.1kg. Assembled size is 43cm wide by 23.5cm deep by 27cm high, and the mounting type is countertop rather than wall mounted. Wave-cut shelves hold each bottle in place so bottles do not roll. Assembly is required and hardware is supplied. Care is simple, wipe with a dry cloth. UPC is 741813298689. Colour and country of origin are not specified in this record, and no warranty or customer rating figures are given here. Suited to kitchens, dining rooms, bar carts and small apartments.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Consumer Guarantees Act 1993 consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Wine Rack Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://winerack.net.nz/bamboo-wine-rack-12-bottle-3-tier/", "canonical_url": "https://winerack.net.nz/bamboo-wine-rack-12-bottle-3-tier/", "json_url": "https://winerack.net.nz/api/products/bamboo-wine-rack-12-bottle-3-tier.json", "updated_at": "2026-10-10" }, { "id": "brass-wine-rack-9-bottle", "sku": "brass-wine-rack-9-bottle", "title": "Urban Deco 9 Bottle Brass Countertop Wine Rack", "slug": "brass-wine-rack-9-bottle", "price": 91.99, "currency": "NZD", "availability": "in_stock", "category": "countertop-wine-racks", "category_label": "Countertop Wine Racks", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "748 g", "images": [ "https://winerack.net.nz/dropship-images/countertop-wine-racks/brass-wine-rack-9-bottle/main-brass-wine-rack-9-bottle.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/brass-wine-rack-9-bottle/brass-wine-rack-9-bottle-2.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/brass-wine-rack-9-bottle/brass-wine-rack-9-bottle-3.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/brass-wine-rack-9-bottle/brass-wine-rack-9-bottle-4.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/brass-wine-rack-9-bottle/brass-wine-rack-9-bottle-5.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/brass-wine-rack-9-bottle/brass-wine-rack-9-bottle-6.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/brass-wine-rack-9-bottle/brass-wine-rack-9-bottle-7.jpg" ], "description_short": "A brushed gold metal frame with honeycomb cradles holds up to nine bottles on a bench, shelf or bar top, needs no assembly, and wipes clean with a damp cloth.", "description": "The problem with keeping wine at home\n\nWine storage is one of those jobs that never quite gets done. You buy a few bottles, they sit on the bench. You buy a few more, they go in the pantry behind the pasta. Someone brings a bottle to dinner and it ends up on top of the fridge. Before long you cannot remember what you have, you knock a bottle over reaching for the olive oil, and the corked bottles are standing upright drying out their corks.\n\nIt is not a dramatic problem. It is just an annoying one that repeats every week.\n\nA countertop rack fixes it with almost no effort. Bottles get a fixed address. You can see every label without moving anything. They lie on their side, which is what corked wine wants. And the bench stops looking like a bottle shop loading dock.\n\nHow a honeycomb countertop rack works\n\nThe design here is simple on purpose. A metal frame is formed into a honeycomb pattern of open cells. Each cell is roughly 10cm across, which is sized to cradle a standard wine bottle. You slide the bottle in neck first or base first, and the ring of metal holds it so it cannot roll.\n\nSeven bottles sit in the cells. Two more rest in the channel that runs across the top of the frame. That is where the nine bottle count comes from. In practice people tend to use the top two spots for whatever is open or about to be opened, since those bottles are the easiest to grab.\n\nThe whole thing measures 36.8cm wide, 19.3cm deep and 19.3cm high. It weighs 748 grams empty. There is no assembly, which matters more than it sounds. Flat pack racks with bolts and allen keys have a habit of loosening after a few months of bottles going in and out. A single formed piece does not have that problem.\n\nThe finish is brushed gold. A brushed surface hides fingerprints and light marks far better than a mirror polish, which is handy in a kitchen where hands are rarely clean.\n\nWho this rack suits\n\nIt suits people who drink wine but do not collect it. If you keep somewhere between a few bottles and a dozen in the house at any time, nine spots covers you with room to grow. That is most households.\n\nIt suits small kitchens. Under 20cm deep means it will sit behind a bench without crowding the working area, and it fits on open shelving where a taller rack would not. If you are hunting for the best small wine rack for bench use, the depth is the number to look at, not the width.\n\nIt suits renters. There is nothing to drill, nothing to mount, nothing to patch when you move out. You pick it up and take it with you.\n\nIt suits anyone setting up a bar area. On a cart or a sideboard it reads as part of the setup rather than as storage shoved in a corner.\n\nWho is it not for? Serious cellarers. If you are laying bottles down for five or ten years, you need stable temperature and darkness, not a kitchen bench. Use this for your drinking stock and keep the investment bottles somewhere cool and dark.\n\nHow to choose between racks\n\nA few things actually matter when you are comparing options.\n\nMeasure the space first. This is the step people skip and then regret. Get a tape measure out and check the width, the depth and the height clearance above. A rack that is 2cm too deep for your bench is useless no matter how good it looks. The 36.8 by 19.3 by 19.3 figures here are the ones to write down.\n\nCount honestly. Buy for the number of bottles you normally have, not the number you imagine having. A rack that sits half empty looks sad, and one that is permanently overflowing defeats the purpose. Nine is a sensible everyday number.\n\nThink about assembly. A no assembly rack is one less thing on the weekend list, and nothing can work loose over time. If you are comparing the best freestanding wine rack options, give preference to single piece construction.\n\nCheck the finish against your kitchen. Gold and brass tones sit well with timber, white, cream and black. They are less happy next to bright chrome and stainless steel in large amounts, though plenty of kitchens mix them deliberately. Brushed finishes are more forgiving day to day than polished ones.\n\nConsider where it will actually live. A rack on a bench is seen constantly, so the look matters. A rack inside a cupboard only needs to fit and hold bottles. If it is going in a cupboard, the best wine rack for a cupboard is whichever one leaves the most usable shelf around it.\n\nGetting the placement right\n\nWine has three enemies in a home: heat, light and vibration. None of them are hard to avoid.\n\nKeep the rack away from the oven, the cooktop and the dishwasher. Appliance heat swings the temperature of nearby bottles up and down, and that cycling ages wine faster than steady warmth does. Avoid the top of the fridge too, since the motor runs warm and hums.\n\nKeep it out of direct sunlight. A window that gets afternoon sun will cook bottles through the glass, and it will fade labels. Clear and light green bottles are the most vulnerable.\n\nA quiet corner of the bench, a shelf in the pantry, a shaded sideboard or a lower cupboard are all good spots. A steady, moderate temperature beats a cold spot that fluctuates.\n\nLooking after it\n\nThe care here is about as easy as it gets. Take the bottles out, wipe the frame with a soft damp cloth, then dry it with a towel. That is the full routine. Do it whenever you are wiping down the bench anyway and it will never build up grime.\n\nTwo things to avoid. Do not use abrasive pads or scouring powder, because they will scratch a brushed finish and leave patches that catch the light differently. Do not leave moisture sitting on the metal, especially in the cells where a damp bottle base has been resting.\n\nIf you are putting it on a delicate benchtop, stick a few small felt pads on the base. It takes two minutes and removes any chance of a scratch when you slide it across to clean.\n\nLoad bottles from the bottom cells upward. It keeps the weight low and makes the rack more settled while you are filling it. When you move it with bottles in, take them out first, or at least lift from underneath with both hands.\n\nThe short version\n\nThis is a nine bottle metal rack in a brushed gold finish, 36.8cm wide and 19.3cm deep, weighing 748 grams, with no assembly needed and a damp cloth for cleaning. It sits on a bench, a shelf, a bar cart or inside a cupboard, holds seven bottles in honeycomb cradles and two more across the top, and keeps your labels visible so you stop guessing what is open.\n\nIf your wine currently lives in three different places around the kitchen and none of them are good, this fixes it for the price of a decent bottle or two. Measure your bench, check the depth, and order it.", "llm_summary": "The Urban Deco 9 Bottle Brass Countertop Wine Rack is a freestanding metal wine rack with a brushed gold finish and a honeycomb frame. It holds nine bottles in total, with seven sitting in the cradles and two resting across the top. Dimensions are 36.8cm wide by 19.3cm deep by 19.3cm high, and the unit weighs 748 grams. It is a countertop mounting type, requires no assembly, and is not extendable. Care is a wipe with a damp cloth. Model number 9btls, manufacturer part number HJJ, UPC 791262864096. Colour is listed as gold and material as metal. Country of origin, exact alloy and plating details are not specified in this record.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Consumer Guarantees Act 1993 consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Wine Rack Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://winerack.net.nz/brass-wine-rack-9-bottle/", "canonical_url": "https://winerack.net.nz/brass-wine-rack-9-bottle/", "json_url": "https://winerack.net.nz/api/products/brass-wine-rack-9-bottle.json", "updated_at": "2026-10-10" }, { "id": "foldable-wooden-wine-rack-10-bottle", "sku": "foldable-wooden-wine-rack-10-bottle", "title": "Foldable Wooden Wine Rack (10 Bottle)", "slug": "foldable-wooden-wine-rack-10-bottle", "price": 48.99, "currency": "NZD", "availability": "in_stock", "category": "countertop-wine-racks", "category_label": "Countertop Wine Racks", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "540 g", "images": [ "https://winerack.net.nz/dropship-images/countertop-wine-racks/foldable-wooden-wine-rack-10-bottle/main-foldable-wooden-wine-rack-10-bottle.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/foldable-wooden-wine-rack-10-bottle/foldable-wooden-wine-rack-10-bottle-2.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/foldable-wooden-wine-rack-10-bottle/foldable-wooden-wine-rack-10-bottle-3.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/foldable-wooden-wine-rack-10-bottle/foldable-wooden-wine-rack-10-bottle-4.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/foldable-wooden-wine-rack-10-bottle/foldable-wooden-wine-rack-10-bottle-5.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/foldable-wooden-wine-rack-10-bottle/foldable-wooden-wine-rack-10-bottle-6.jpg" ], "description_short": "Solid wood construction, no assembly, horizontal bottle cradling to keep corks moist, and a slim folded profile that slides into a cupboard or a suitcase.", "description": "The problem with most wine racks\n\nWine racks have a habit of taking up more room than the wine does. You buy one to tidy up the bottles cluttering the bench, and six months later the rack itself is the permanent clutter: half empty, slightly in the way, impossible to move without unloading it first.\n\nThat is the gap a foldable wooden wine rack fills. It does the job when you have bottles to store, and it disappears when you do not. For anyone in a flat, a small terrace house, a caravan or a share kitchen, that flexibility matters more than capacity. Ten bottles is plenty for most households. Ten bottles plus a rack you can fold away is better.\n\nHow this one works\n\nThe rack is made of wood, finished brown with a brushed surface. It arrives folded flat. You open it out, stand it on a level bench or shelf, and load bottles into the slots. There is no assembly stage, no hardware bag and no diagram to puzzle over. That sounds like a small thing until you have spent an evening with an allen key and a sheet of symbols.\n\nBottles sit horizontally. This is the traditional way to keep corked wine, and the reason is simple. Lying flat, the wine stays in contact with the cork. A wet cork swells slightly and keeps its seal, so less air sneaks in. Stand a corked bottle upright for a long stretch and the cork dries, shrinks and lets the wine oxidise sooner. If you drink everything within a week it barely matters. If you buy by the case and work through it slowly, it matters a lot.\n\nHorizontal storage also stacks better. Bottles nest against each other instead of needing individual upright slots, which is how a rack this size gets to ten bottles without sprawling across the whole bench.\n\nThe numbers you need before you buy\n\nThe listed product dimensions are 12.7 cm deep by 30.5 cm wide by 44.5 cm high, and the listing gives a separate size reading of 12.2 x 17.7 x 4.9 inches. The rack weighs 540 grams.\n\nTake two measurements at home before you order. First, the depth of your bench or shelf, because a rack that overhangs the front edge will get knocked. Second, the vertical clearance if you are placing it under an overhead cupboard or a floating shelf. People get caught by the second one more often than the first.\n\nIf your bench is shallow, a sideboard, a bar cart or the top of a low bookcase can be a better home. The listing covers table top and floor stand mounting, so a dry corner of the floor is also an option if you have nowhere else.\n\nWho it suits\n\nThis rack is a good fit if you keep a modest, rotating stash rather than a cellar. Think a case of everyday red, a few whites for the fridge rotation and a nicer bottle saved for a birthday. It is the kind of countertop wine storage that handles the bottles you are actually going to drink this season.\n\nIt also suits people who move house often or live somewhere temporary. Fold it, put it in a bag, unfold it in the new kitchen. No disassembly, no lost screws.\n\nVenues get value from the folding design too. A bar can run several racks on a busy Friday and store them flat on Monday. The same goes for hotels and restaurants where storage space behind the scenes is always short.\n\nWhere it is less suitable: long term cellaring of valuable wine. Nothing about a timber bench rack controls temperature or humidity, and a kitchen swings between both. For bottles you plan to hold for years, you want a cool, dark, stable space, and ideally a dedicated cellar or wine fridge.\n\nChoosing between rack styles\n\nA few things separate one rack from another once you start comparing.\n\nCapacity is the obvious one, but it is worth thinking about honestly. A twenty bottle rack sounds generous until you realise you have never owned twenty bottles at once, and now you have a mostly empty structure on the bench. Buying for the number of bottles you genuinely keep is usually the better call.\n\nFootprint matters more than capacity in a small kitchen. Measure the space first, then shop. A narrow, taller rack often works better against a wall than a wide, shallow one.\n\nMaterial changes both the look and the care routine. Timber is warm, quiet and forgiving of knocks, and it ages into a kitchen rather than standing apart from it. Metal racks are usually slimmer but can rattle and scratch benches. Plastic is cheap but tends to look it.\n\nPortability is the point of difference here. A fixed rack is a piece of furniture. A folding wine rack is a tool you get out when you need it. If your kitchen doubles as a workspace, a homework table or a place the dog sleeps under, being able to clear the bench in ten seconds is genuinely useful.\n\nFinally, check whether assembly is required. Flat pack racks can arrive with warped parts or missing fasteners, and assembly introduces joints that loosen over time. A rack that unfolds has fewer ways to go wrong.\n\nLooking after it\n\nCare here is refreshingly simple. Wipe the timber with a dry cloth. If something sticky lands on it, a barely damp cloth will lift it, but dry the wood straight afterwards. Timber and standing water do not get along.\n\nSkip the harsh cleaners, bleach sprays and scouring pads. They can strip or dull the brushed finish. You also want to keep the rack out of direct sun, away from the oven and clear of the dishwasher steam vent, since repeated heat cycles are hard on both wood and wine.\n\nLoad and unload gently. Slide bottles in rather than dropping them, and always fold the rack empty. When you pack it away, choose a dry cupboard rather than a damp garage or an outdoor shed.\n\nOne habit worth building: rotate your bottles. Put new arrivals at the back and bring older ones forward, the same way you would with tins in the pantry. It stops a bottle sitting forgotten at the far end for two years.\n\nGifting it\n\nThis makes an easy gift, which is not something you can say about most homewares. It needs no assembly, it is light at 540 grams, and it folds flat so it wraps and posts without fuss. Add a bottle in the first slot and you have a complete housewarming present. It works equally well for someone who has just moved into their first flat and for the friend who always hosts.\n\nThe short version\n\nIf you want somewhere sensible to keep ten bottles without surrendering your bench permanently, this foldable wooden wine rack covers it. Solid wood, brushed brown finish, horizontal slots to keep corks moist, no assembly, and a frame that folds flat when you are done.\n\nCheck your clearance against the 44.5 cm height and your bench depth against the 12.7 cm depth, keep it out of the sun, wipe it with a dry cloth, and it will quietly do its job for years. For everyday drinking wine in a kitchen that does not have room to spare, that is exactly the right amount of rack.", "llm_summary": "The Ferfil foldable wooden wine rack is a countertop wine bottle holder with a stated capacity of ten bottles. It is made from wood, finished in brown with a brushed finish, and described as modern in style. No assembly is required: the rack unfolds for use and folds flat for storage or travel. Bottles are stored horizontally, which helps keep corks moist. Listed product dimensions are 12.7 D x 30.5 W x 44.5 H centimetres, with a separate listed size of 12.2 x 17.7 x 4.9 inches, and the item weighs 540 grams. Mounting is table top or floor stand. Care guidance is to wipe with a dry cloth. Country of origin is not specified in this record, and no warranty or certification details are given.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Consumer Guarantees Act 1993 consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Wine Rack Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://winerack.net.nz/foldable-wooden-wine-rack-10-bottle/", "canonical_url": "https://winerack.net.nz/foldable-wooden-wine-rack-10-bottle/", "json_url": "https://winerack.net.nz/api/products/foldable-wooden-wine-rack-10-bottle.json", "updated_at": "2026-10-10" }, { "id": "gold-wine-rack-5-bottle", "sku": "gold-wine-rack-5-bottle", "title": "Gold 5 Bottle Countertop Wine Rack", "slug": "gold-wine-rack-5-bottle", "price": 62.99, "currency": "NZD", "availability": "in_stock", "category": "countertop-wine-racks", "category_label": "Countertop Wine Racks", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "0.55 kg", "images": [ "https://winerack.net.nz/dropship-images/countertop-wine-racks/gold-wine-rack-5-bottle/main-gold-wine-rack-5-bottle.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/gold-wine-rack-5-bottle/gold-wine-rack-5-bottle-2.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/gold-wine-rack-5-bottle/gold-wine-rack-5-bottle-3.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/gold-wine-rack-5-bottle/gold-wine-rack-5-bottle-4.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/gold-wine-rack-5-bottle/gold-wine-rack-5-bottle-5.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/gold-wine-rack-5-bottle/gold-wine-rack-5-bottle-6.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/gold-wine-rack-5-bottle/gold-wine-rack-5-bottle-7.jpg" ], "description_short": "Brushed gold metal, a hexagonal modern shape and five cradled bottle slots in a footprint of roughly 25.5 x 18.5 x 23.5 cm.", "description": "The problem with five bottles and nowhere to put them\n\nAlmost nobody starts with a cellar. You start with a bottle someone brought to dinner, one you liked on holiday, two from the last time there was a sale on something drinkable. Suddenly there are five bottles living in odd places around the kitchen. One behind the toaster. Two lying flat in the pantry under a bag of rice. One standing up in the cupboard with the label turned away so you have no idea what it is.\n\nIt is a small annoyance, but it is a daily one. Bottles standing upright for months are not doing their corks any favours. Bottles hidden in a cupboard get forgotten, which is how you end up drinking the cheap one twice and leaving the good one until it is past its best. And bottles scattered across the bench steal prep space you actually need.\n\nA countertop wine rack fixes all of that at once. Five bottles, one place, labels facing out, lying the way they should be. It takes a patch of bench about the size of a dinner plate.\n\nWhat this rack actually is\n\nThis is a small metal rack with a brushed gold finish, shaped into a hexagonal geometric frame. It holds five standard size wine bottles horizontally, each in its own slot. The listed dimensions are 25.5 cm deep, 18.5 cm wide and 23.5 cm high, and the whole thing weighs 0.55 kg. It is a tabletop mount design, so it stands on a surface rather than fixing to a wall. Assembly is required, and it is not extendable, so the capacity stays at five.\n\nThose are the facts. What they add up to in practice is a rack that behaves more like a piece of decor than a storage product. The gold tone and the hexagonal shape mean it reads as something you put out on purpose, which matters when it is sitting in the open next to your glasses.\n\nWhy horizontal storage is the right call\n\nIf a bottle is sealed with a natural cork, the cork needs to stay damp. A dry cork shrinks slightly and lets air creep into the bottle, and air is what turns good wine into vinegar over time. Lying the bottle on its side keeps the wine touching the cork and keeps the seal doing its job.\n\nFor screw cap bottles the cork argument does not apply, but horizontal storage still wins on a practical level. The label faces you. You can see at a glance which bottle is which, which means you are not pulling three out and squinting at them while dinner is going cold. Every slot in this rack holds the bottle flat with the label visible, which is half the point of having a rack at all.\n\nMeasuring before you buy\n\nThis is the step people skip and then regret. Grab a tape measure and check three things.\n\nDepth comes first. You need at least 25.5 cm from the front of the surface to the splashback or wall. Kitchen benches are usually around 60 cm deep, so that is rarely a problem on an open bench. It gets tighter on a narrow shelf or a bar cart, which is where the measuring actually pays off.\n\nWidth is 18.5 cm, which is the easy one. Almost any corner handles that.\n\nHeight is 23.5 cm, and this is the number that decides whether your rack can live inside a cabinet. Plenty of people want a wine rack for cabinet use, sitting on a shelf in a sideboard or in the base of a pantry. Check your shelf clearance. If you have more than 23.5 cm of space between shelves, you are fine. If the shelf is adjustable, even better, since you can drop it down a notch and make the space.\n\nOne more thing worth checking is whether the spot is near heat. Above a dishwasher, next to an oven or in a sunny window are all bad homes for wine. Warmth and light age wine faster than you want, and constant steam is not kind to a brushed metal finish either. A shaded corner away from the cooking zone is the sweet spot.\n\nWho this suits\n\nCompact wine storage makes the most sense for people who drink wine regularly but do not collect it seriously. If five bottles is roughly where your stock sits most weeks, this is the right size. You are not buying storage you will never fill, and you are not buying something so small that it solves nothing.\n\nIt is a particularly good fit for apartments and smaller kitchens. A floor-standing rack takes real estate you cannot spare in a tight galley kitchen. A benchtop wine rack borrows a corner and gives it back whenever you want to move the rack, which is easy enough at half a kilo.\n\nIt also works well on a bar cart, where a 5 bottle wine rack sits alongside the glasses and the ice bucket and makes the whole setup look deliberate. If you already have gold or brass hardware in the room, the finish ties in without any effort.\n\nAnd it is a safe gift. Giving someone a wine rack gift for wine lovers is low risk, because almost everyone who drinks wine has the same scattered-bottles problem and almost nobody has got around to solving it. The light weight keeps postage sensible if you are sending it a long way.\n\nWho might want something else\n\nIf you buy wine by the case and have twenty bottles at home, five slots will frustrate you. Look at a larger floor rack or a stackable system instead. If you want wine held at a specific serving temperature, this is not that product, it is a holder rather than a cooler. And if you need the bottles off the surface entirely because your bench space is zero, a wall mounted option will suit you better, since this one is tabletop mount only.\n\nSetting it up and keeping it nice\n\nAssembly is required, so budget a few quiet minutes on the kitchen table. Once it is together, set it on a flat, level surface. Load bottles into the lower slots first and work upward, which keeps the weight low and the rack steady.\n\nCare is about as simple as it gets. The recommended method is wiping with a dry cloth, and that is genuinely all it needs most of the time. Dust settles on kitchen surfaces, a quick pass sorts it out. If a drip of something sticky lands on it, use a cloth that is barely damp and then dry the metal straight away. Skip the scourers, the steel wool and anything branded as a heavy duty bathroom cleaner, because abrasives and strong chemicals can dull a brushed finish permanently.\n\nEvery few months, give the assembly points a check and nudge anything that has worked loose. It is a thirty second job and it keeps a freestanding wine rack feeling solid for years.\n\nThe short version\n\nFive bottles, one tidy spot, labels facing out. This gold wine rack takes up about 25.5 x 18.5 x 23.5 cm, weighs 0.55 kg, holds standard wine bottles on their sides, and needs assembling when it arrives. The brushed gold hexagonal frame looks like decor, so you can leave it on the bench without it looking like storage.\n\nMeasure your space first, keep it away from the oven and the sunny window, and wipe it with a dry cloth when it looks dusty. That is the whole job.", "llm_summary": "The Urban Deco gold wine rack is a small countertop wine rack that holds five standard wine bottles horizontally. It is made from metal with a brushed finish in a gold colourway, in a modern hexagonal shape, and mounts tabletop style rather than on a wall. Listed product dimensions are 25.5 cm deep by 18.5 cm wide by 23.5 cm high, with an item weight of 0.55 kg. Model number is 5btls and the manufacturer part number is 362. Assembly is required and the rack is not extendable. Care guidance is to wipe with a dry cloth. Country of origin, warranty terms and customer rating data are not specified in this record.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Consumer Guarantees Act 1993 consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Wine Rack Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://winerack.net.nz/gold-wine-rack-5-bottle/", "canonical_url": "https://winerack.net.nz/gold-wine-rack-5-bottle/", "json_url": "https://winerack.net.nz/api/products/gold-wine-rack-5-bottle.json", "updated_at": "2026-10-10" }, { "id": "stackable-metal-wine-rack-4-bottle", "sku": "stackable-metal-wine-rack-4-bottle", "title": "Stackable Metal Wine Rack, 4 Bottle Countertop Holder", "slug": "stackable-metal-wine-rack-4-bottle", "price": 73.99, "currency": "NZD", "availability": "in_stock", "category": "countertop-wine-racks", "category_label": "Countertop Wine Racks", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "635 g", "images": [ "https://winerack.net.nz/dropship-images/countertop-wine-racks/stackable-metal-wine-rack-4-bottle/main-stackable-metal-wine-rack-4-bottle.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/stackable-metal-wine-rack-4-bottle/stackable-metal-wine-rack-4-bottle-2.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/stackable-metal-wine-rack-4-bottle/stackable-metal-wine-rack-4-bottle-3.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/stackable-metal-wine-rack-4-bottle/stackable-metal-wine-rack-4-bottle-4.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/stackable-metal-wine-rack-4-bottle/stackable-metal-wine-rack-4-bottle-5.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/stackable-metal-wine-rack-4-bottle/stackable-metal-wine-rack-4-bottle-6.jpg" ], "description_short": "Powder-finished alloy steel with wave-shaped cradles holds bottles flat and stable, needs no assembly, and stacks with matching racks when your collection outgrows one tier.", "description": "The problem with keeping wine in a cupboard\n\nWine has a habit of ending up wherever there is a gap. A couple of bottles behind the cereal, one standing on the fridge, another lying on its side in the pantry that rolls to the back every time the door swings. You forget what you have. You knock a bottle over reaching for something else. And when guests arrive, you are digging through a cupboard instead of just picking one.\n\nA small countertop rack fixes that in about ten seconds. Four bottles, out in the open, each in its own spot. You can see the labels, so you stop buying duplicates of the one you did not like. You can grab one without moving anything. And the bench stops collecting stray bottles because they now have somewhere to go.\n\nThat is the whole argument for a bench rack. It is not a cellar, and it is not pretending to be. It is a landing spot for the bottles you are actually going to drink in the next month or two.\n\nHow a stackable wine rack works\n\nThe design here is a wave. Instead of flat bars, the steel is pressed into shallow dips, and each dip holds one bottle. The curve is what stops the bottle rolling. Set a bottle down on a flat shelf and it drifts until it hits something. Set it in a shaped cradle and it stays where you put it.\n\nBottles lie flat rather than standing up. That is deliberate. A cork needs to stay in contact with the wine to stay swollen and sealed. If it dries out it shrinks, air creeps in, and the wine goes flat and dull. If everything you buy has a screw cap this matters less, but horizontal storage still uses space better, since four bottles lying down take up far less height than four standing.\n\nStacking is the second idea. One rack holds four. Put a second rack on top and you have eight in the same bench footprint. A third gets you twelve. The dimensions stay the same width and depth, you just build upward. This is handy because most people underestimate how fast a collection grows. You buy the rack for four bottles, then a case arrives, and suddenly you need more.\n\nWho this suits\n\nApartment dwellers and renters get the most out of it. You cannot drill a wall-mounted rack into a rental without a conversation you would rather not have, and freestanding floor cabinets eat space you do not have. A rack that sits on a bench or a shelf with no fixings at all sidesteps all of that. When you move, it goes in a box.\n\nIt also suits people who drink wine rather than collect it. If you keep six to twelve bottles on hand and turn them over regularly, you do not need temperature control or a locked cabinet. You need somewhere tidy and reachable. The best compact wine storage for that kind of drinker is simple, low and out of the way.\n\nShared houses do well with it too, because each bottle is visibly separate. People can see whose is whose without opening a cupboard.\n\nWho it does not suit: anyone laying down serious bottles for years. A kitchen bench is warm, bright and subject to temperature swings, which are the three things long-term storage needs to avoid. If you are ageing wine properly, you want a cool, dark, stable spot, and ideally a dedicated unit. This rack can still live in that cupboard or cellar, it just should not be the only thing standing between a good bottle and a hot afternoon.\n\nWorking out the size you need\n\nStart with the space, not the rack. Three numbers matter.\n\nWidth is the easiest. This one is 40 cm across, roughly the width of a microwave. Run a tape measure along the bench or shelf and make sure you have that plus a little breathing room on each side.\n\nHeight is where people get caught out. The rack is 20 cm tall, but bottles sit in it, and a stacked second tier doubles that. If it is going under an overhead cupboard or on a pantry shelf, check the clearance above. Twenty centimetres for one tier, around 60 cm if you are planning three.\n\nDepth is 9.5 cm for the rack itself, but a wine bottle is roughly 30 cm long and lies across the bars, so your shelf needs to be deep enough for the bottle, not just the frame. A standard kitchen bench handles this easily. A narrow floating shelf might not.\n\nIf you are torn between sizes, think about what you actually keep at home rather than what you would like to keep. Four bottles covers most weeks. Eight covers a dinner party and the weeks around it.\n\nMaterial and finish\n\nSteel is the sensible choice for a bench rack. It stays rigid under the weight of four full bottles, which together run to about five kilograms. Timber racks look warm but can bow over time in a humid kitchen. Thin wire racks flex. Alloy steel, like the frame here, holds its shape.\n\nThe black finish is a practical pick rather than a decorative one. Dark metal sits quietly next to timber benches, stone, laminate and painted cabinets. It shows less dust than pale finishes and does not fight with whatever else is on the bench. If you are after a black wine rack specifically because your kitchen hardware is dark, it will match without effort.\n\nOne thing to treat gently: any painted or coated metal can mark if you drag glass across it. Lift bottles in and out rather than sliding them, and the finish will stay even for years.\n\nLooking after it\n\nCare is about as easy as it gets. A dry cloth over the bars every couple of weeks keeps dust down. That is the care instruction given for this product and it is genuinely all it needs.\n\nIf something sticky lands on it, a cloth wrung out almost dry works, followed straight away by a dry wipe. Do not let water sit in the dips. Skip scouring pads, powders and strong solvents, which can scratch the coating and leave dull patches.\n\nCheck the base now and then if the rack lives near a sink or kettle. Steel handles ordinary kitchen humidity fine, but standing moisture is not a friend to any metal finish. Keeping it dry is the whole maintenance routine.\n\nPlacement tips that make a difference\n\nKeep it away from the oven, the dishwasher vent and the kettle. Heat is the fastest way to age wine badly, and those three spots cycle hot and cool all day.\n\nKeep it out of direct sun. Light breaks wine down, which is why so many bottles are green or brown glass in the first place. A shaded corner of the bench or an interior shelf is better than a windowsill.\n\nPut it where you can reach the labels. Half the point of a bench rack is seeing what you have. If the rack ends up behind the toaster, you are back to the cupboard problem.\n\nIf you stack tiers, push the column back against a wall or splashback rather than leaving it free on an open bench. It is stable, but there is no reason to test that with your elbow.\n\nThe short version\n\nThis is a four-bottle steel rack, 40 cm wide, 20 cm tall and 9.5 cm deep, finished in black, weighing 635 g. Bottles lie flat in shaped cradles so they do not roll. There is nothing to assemble and nothing to mount. Matching racks stack to add tiers when four is not enough.\n\nBuy it if you keep a handful of bottles on hand and want them visible, tidy and off the cupboard floor. Measure your height clearance first, keep it away from heat and sun, and wipe it with a dry cloth now and then. That is the whole job.", "llm_summary": "The Stackable Metal Wine Rack is a countertop wine bottle holder from Amazon Basics (model WK111899-1) that stores four bottles lying flat. It is made from metal alloy steel in black, measures 9.5 cm deep by 40 cm wide by 20 cm high, and weighs 635 g. Wave-shaped recesses cradle each bottle to stop rolling or tipping, and matching racks can be stacked to add tiers in the same footprint. It is a tabletop mount design listed as size Large, with no assembly required. Care is a wipe with a dry cloth. Country of origin is not specified in this record, and the exact finish type and any warranty are likewise not stated.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Consumer Guarantees Act 1993 consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Wine Rack Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://winerack.net.nz/stackable-metal-wine-rack-4-bottle/", "canonical_url": "https://winerack.net.nz/stackable-metal-wine-rack-4-bottle/", "json_url": "https://winerack.net.nz/api/products/stackable-metal-wine-rack-4-bottle.json", "updated_at": "2026-10-10" }, { "id": "wavy-wooden-wine-rack-12-bottle", "sku": "wavy-wooden-wine-rack-12-bottle", "title": "Wavy Wooden 12 Bottle Countertop Wine Rack", "slug": "wavy-wooden-wine-rack-12-bottle", "price": 116.99, "currency": "NZD", "availability": "in_stock", "category": "countertop-wine-racks", "category_label": "Countertop Wine Racks", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "1 kg", "images": [ "https://winerack.net.nz/dropship-images/countertop-wine-racks/wavy-wooden-wine-rack-12-bottle/main-wavy-wooden-wine-rack-12-bottle.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/wavy-wooden-wine-rack-12-bottle/wavy-wooden-wine-rack-12-bottle-2.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/wavy-wooden-wine-rack-12-bottle/wavy-wooden-wine-rack-12-bottle-3.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/wavy-wooden-wine-rack-12-bottle/wavy-wooden-wine-rack-12-bottle-4.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/wavy-wooden-wine-rack-12-bottle/wavy-wooden-wine-rack-12-bottle-5.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/wavy-wooden-wine-rack-12-bottle/wavy-wooden-wine-rack-12-bottle-6.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/wavy-wooden-wine-rack-12-bottle/wavy-wooden-wine-rack-12-bottle-7.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/wavy-wooden-wine-rack-12-bottle/wavy-wooden-wine-rack-12-bottle-8.jpg" ], "description_short": "Three curved solid wood tiers, silver metal struts and shaped troughs keep bottles cradled, stable and easy to reach, with assembly that takes only a few minutes.", "description": "The problem with loose bottles\n\nWine has a habit of ending up in the worst places. The bottom of a cupboard, behind the baking tins. Standing in a line at the back of the bench where one careless elbow sends them clinking. Lying flat in a drawer, rolling every time you open it.\n\nNone of this is a disaster, but it adds friction. You cannot see what you own, so you buy another bottle of the same thing. You cannot read labels without picking each one up. And bottles stored standing in a warm cupboard with a cork in them slowly dry out at the seal.\n\nA countertop wine rack solves a small, specific problem. It gives twelve bottles a fixed address, in a place you walk past every day, at a size that does not demand new furniture.\n\nHow a wavy wooden rack works\n\nThe design here is simple enough that it almost explains itself. Three timber boards are pressed into a gentle wave. Where the wave dips, a bottle sits. The curve of the wood matches the curve of the glass, so the bottle settles into the trough and stays there. There is no clip, no bracket and nothing to adjust.\n\nThe three boards are held apart by eight metal nut struts. Those struts do two jobs. They set the gap between tiers so bottles have clearance, and they keep the whole frame square once the screws are tight. Without them the boards would just be three loose planks.\n\nCapacity splits across the tiers. The lower two tiers carry eight slots sized for standard bottles. The top tier has four wider slots designed for oversized bottles, which is where a champagne bottle or a fatter Burgundy shape belongs. Keeping the heaviest bottles low is good practice with any freestanding rack, so load the bottom first and work up.\n\nOverall the rack is 42.2cm wide, 15.7cm deep and 21.8cm high. Empty it weighs a kilogram. Those are easy numbers to picture. It is roughly the footprint of a bread board on its side and shorter than most kettles.\n\nWho it suits\n\nThis style of rack earns its keep in a few specific situations.\n\nSmall kitchens and apartments are the obvious one. If your pantry is one cupboard and your bench is a metre of clear space, a floor-standing wine cabinet is out of the question. A tabletop wine rack that holds a dozen bottles in less than half a metre of width is about the right trade.\n\nRenters do well with it too. Nothing screws to the wall and nothing is permanent. You unscrew eight screws, flat pack the boards and the whole thing travels in a box.\n\nIt also works for people who drink through their wine steadily rather than cellaring it. Twelve bottles is a working stock, not an archive. If you are laying bottles down for a decade you want a cool, dark, stable space, and a kitchen bench is none of those things. If you are keeping the next month of drinking in one place, this is exactly the right tool.\n\nFinally, it is a reliable present. A wooden wine rack is one of the few gifts for wine drinkers that does not duplicate something they already own. Most people have a decent corkscrew and a couple of aerators. Far fewer have somewhere sensible to put the bottles.\n\nHow to choose the right rack\n\nA few things are worth checking before you buy any countertop rack.\n\nMeasure the space first, including the height. Width is the number everyone checks, but height catches people out. If the rack is going under an overhead cupboard or on a pantry shelf, you need at least 21.8cm of clearance plus a bit of room to lift bottles in and out at an angle.\n\nThink about bottle shapes, not just bottle counts. A rack rated for twelve bottles assumes twelve standard bottles. If half your collection is sparkling, you will fill the four oversized slots quickly and find standard slots are tight for the rest. Check the split between standard and wide slots against what you actually buy.\n\nLook at how the bottles are held. Flat shelves let bottles roll. Wire cradles can press into labels. Shaped timber troughs sit somewhere in the middle, holding the bottle without a hard contact point. For a rack that lives in the open, the shaped-trough approach tends to look tidier because the bottles all line up at the same angle.\n\nConsider the surface it sits on. Stone and laminate benches are fine. On a polished timber sideboard, put a felt pad or a runner underneath, because any rack loaded with glass will mark a soft surface over time if it gets nudged around.\n\nCheck what assembly involves. This one uses three boards, eight struts, eight screws and a written instruction sheet. You supply the Phillips screwdriver. That is about as simple as flat pack gets, but it is still worth knowing before the box arrives on a Friday night.\n\nGetting the most out of it\n\nOnce it is standing, a couple of habits make a real difference.\n\nPut the bottles you plan to drink soonest at the front of the top tier, where they are easiest to grab. Keep the back of the lower tiers for anything you are saving. It sounds fussy, but it stops you reaching past the good bottle every night and eventually drinking it by accident.\n\nFace the labels out. Horizontal storage is only half the benefit. Being able to read what you have from across the kitchen is the other half, and it is the reason a rack beats a cupboard.\n\nKeep it away from the oven, the dishwasher vent and a sunny window. Heat and light are harder on wine than almost anything else. A bench rack is never going to be a cellar, but moving it a metre away from the heat source genuinely helps.\n\nFinally, check the screws every few months. Any assembled timber and metal structure settles a little in the first weeks of use. A quarter turn on each screw keeps the frame tight and stops the tiers developing a wobble.\n\nCare and longevity\n\nCare is straightforward. Wipe the boards with a dry cloth, or a barely damp one if something sticky has dripped. Do not soak the timber, and skip solvent cleaners and scouring pads, both of which will dull the polished surface.\n\nIf a bottle drips, deal with it quickly. Wine and oil sitting on wood overnight is what leaves a ring. A quick wipe and a dry cloth and you will never see it again.\n\nThe metal struts need nothing beyond an occasional tighten. If you move house, take the rack apart rather than carrying it loaded or assembled, and keep the small hardware bag with the boards.\n\nThe short version\n\nThis is a 12 bottle wine rack that does one job well. Three wavy timber tiers, eight standard slots and four wider ones, 42.2cm of bench width, a kilogram empty and a few minutes of assembly with a Phillips screwdriver.\n\nIt will not replace a cellar and it is not meant to. What it does is take a dozen bottles out of the cupboard, put them where you can see them, and stop them rolling around. For most kitchens, that is the problem worth solving.", "llm_summary": "The TRUDING wavy wooden wine rack (model WRWV002) is a three tier countertop wine rack that holds 12 bottles. Eight slots sit on the lower two tiers for standard bottles and four wider slots on the top tier suit oversized bottles. It measures 15.7cm deep by 42.2cm wide by 21.8cm high and weighs 1kg. The rack is made of wood and metal with a polished finish in a natural wood colour, and the curved timber troughs stop bottles rolling. Assembly is required and uses three wavy boards, eight double-pass nut struts and eight Phillips screws, with instructions included. Care is simply wiping with a dry cloth. Country of origin and GTIN are not specified in this record.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Consumer Guarantees Act 1993 consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Wine Rack Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://winerack.net.nz/wavy-wooden-wine-rack-12-bottle/", "canonical_url": "https://winerack.net.nz/wavy-wooden-wine-rack-12-bottle/", "json_url": "https://winerack.net.nz/api/products/wavy-wooden-wine-rack-12-bottle.json", "updated_at": "2026-10-10" }, { "id": "wooden-wine-rack-8-bottle-3-tier", "sku": "wooden-wine-rack-8-bottle-3-tier", "title": "3-Tier Wooden Wine Rack (8 Bottles)", "slug": "wooden-wine-rack-8-bottle-3-tier", "price": 86.99, "currency": "NZD", "availability": "in_stock", "category": "countertop-wine-racks", "category_label": "Countertop Wine Racks", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "0.74 kg", "images": [ "https://winerack.net.nz/dropship-images/countertop-wine-racks/wooden-wine-rack-8-bottle-3-tier/main-wooden-wine-rack-8-bottle-3-tier.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/wooden-wine-rack-8-bottle-3-tier/wooden-wine-rack-8-bottle-3-tier-10.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/wooden-wine-rack-8-bottle-3-tier/wooden-wine-rack-8-bottle-3-tier-2.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/wooden-wine-rack-8-bottle-3-tier/wooden-wine-rack-8-bottle-3-tier-3.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/wooden-wine-rack-8-bottle-3-tier/wooden-wine-rack-8-bottle-3-tier-4.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/wooden-wine-rack-8-bottle-3-tier/wooden-wine-rack-8-bottle-3-tier-5.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/wooden-wine-rack-8-bottle-3-tier/wooden-wine-rack-8-bottle-3-tier-6.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/wooden-wine-rack-8-bottle-3-tier/wooden-wine-rack-8-bottle-3-tier-7.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/wooden-wine-rack-8-bottle-3-tier/wooden-wine-rack-8-bottle-3-tier-8.jpg", "https://winerack.net.nz/dropship-images/countertop-wine-racks/wooden-wine-rack-8-bottle-3-tier/wooden-wine-rack-8-bottle-3-tier-9.jpg" ], "description_short": "Three timber tiers in a natural wood stain hold up to eight standard bottles lying flat, in a compact freestanding frame that suits counters, cabinets, pantry shelves and bar carts.", "description": "The problem with loose bottles\n\nWine has a way of spreading out. One bottle lands on the bench after a shop. Two more go in the back of the pantry, where they roll every time you pull out the pasta. A gift bottle sits by the kettle for a month because nobody has a better spot for it. Before long you have bottles in four places and no idea what you actually own.\n\nThat is the small, everyday problem a countertop rack solves. It gives every bottle one address. You can see the labels, you can grab the one you want, and the bench stops looking cluttered.\n\nA wooden wine rack 8 bottle setup is the sweet spot for most homes. Eight is roughly a case minus a few, which is about what a normal household has on hand at any one time. It is enough to cover a week of dinners and a couple of guests, without turning your kitchen into a bottle shop.\n\nHow a three-tier rack works\n\nThis design is simple on purpose. Three horizontal shelves of timber lattice, with openings sized for a standard bottle. You slide each bottle in neck first so it rests on its side. The weight is carried by the frame, not by one bottle leaning on another.\n\nLying flat matters more than people expect. With a cork closure, the wine stays in contact with the cork, which keeps the cork from drying out and shrinking. A dry cork lets air in, and air is what turns a good bottle into vinegar. Even for screw caps, horizontal storage is the most compact way to use a shallow shelf.\n\nThe other benefit is visibility. Stand bottles upright and you see eight identical foils. Lay them flat and you see eight labels. When you are deciding what to open, that difference is what makes a wine bottle holder genuinely useful rather than just decorative.\n\nThis rack measures 42.5 cm wide, 15 cm deep and 28.3 cm high, and weighs 0.74 kg empty. The imperial listing gives it as 16.73 x 5.91 x 11.14 inches. Each inner lattice opening is listed at about 3.5 x 3.5 inches, which is the number to check against your own bottles.\n\nWho it suits\n\nIf you drink wine casually and want it organised, this is your rack. It is for the person who buys a few bottles at a time, keeps them for weeks rather than decades, and wants them within reach of the glasses.\n\nIt also suits renters and small-space living. There is nothing to drill, nothing to mount, no commitment to a wall. You put it down, you load it, you are done. If you move house, it comes with you in a box.\n\nTimber racks are a good fit for kitchens that already have warm materials in them: oak floors, pine shelving, a wooden chopping board on the bench. The natural wood stain finish sits alongside those without competing. In a very cool, all-white or all-steel kitchen, a wooden rack is still a nice contrast, just a more noticeable one.\n\nWho it does not suit: serious collectors. If you are ageing bottles for years, you need a cellar or a temperature-controlled cabinet, not a bench. And if your collection runs to twenty or thirty bottles, one eight-bottle rack will frustrate you. Buy two, or look at floor-standing storage instead.\n\nWorking out where it goes\n\nMeasure first. This is the step most people skip and then regret.\n\nFor a bench, check the depth of your counter and how far your upper cabinets overhang. A 15 cm deep rack leaves plenty of prep space on a standard 60 cm bench. The 28.3 cm height clears most splashbacks and sits comfortably under standard wall units.\n\nFor a cabinet or pantry shelf, measure the internal height between shelves, not the outside of the unit. You need a little more than 28.3 cm so you can lift bottles in and out without scraping. Also check the shelf depth, since a rack that overhangs the front edge is an accident waiting to happen.\n\nFor a bar cart, think about balance. Carts are narrow and they roll. Put the rack centred or toward the back, load the lowest tier first, and do not fill a cart's top shelf with eight full bottles if the cart is light.\n\nAvoid three places in particular. Direct sunlight through a window, which heats and light-strikes the wine. Next to an oven or dishwasher, where repeated heat cycles are hard on both wine and timber. And anywhere that stays damp, since moisture is the enemy of a stained wood finish.\n\nChecking your bottles actually fit\n\nThe lattice openings are listed at roughly 3.5 x 3.5 inches. Standard Bordeaux and Burgundy bottles, which cover the vast majority of what sits on a shop shelf, slide in without drama.\n\nWhere you want to be careful is with the wide ones. Champagne and sparkling bottles are heavier and broader through the body. Magnums are a different league entirely. Some dessert wines and a few show-off Italian reds also come in oversized glass. Take a tape measure to the widest part of your bottle and compare it to the opening before you order.\n\nIf you own one or two wide bottles and six standard ones, you can often sit the wide ones in the outer positions where there is a touch more clearance, or just store them separately. It is not a reason to skip a rack, it is a reason to know what goes where.\n\nPutting it together\n\nThe box holds six wood boards, twelve screws with two spares, and an instruction manual. You need a screwdriver and a clear patch of table.\n\nLay the boards out and match them to the diagram before you start driving screws. Start each screw by hand so you do not cross-thread it, then tighten properly. Timber racks go wobbly when one or two screws are left half-in, and a wobble under eight bottles is not something you want to discover later.\n\nOnce it is built, set it on the surface you have chosen and press down on each corner. If it rocks, the surface is uneven rather than the rack. Shift it or shim the spot. Then load the bottom tier first and work up, which keeps the weight low while you are filling it.\n\nKeeping it looking good\n\nCare is genuinely easy. Wipe it with a dry cloth when dust builds up, which for most kitchens is every week or two.\n\nIf something sticky gets on it, a slightly damp cloth will lift it. Dry the timber straight afterwards. Do not soak the wood, do not leave it wet, and keep strong cleaning solvents away from the stained finish. Those are the only real rules.\n\nEvery few months, give the screws a quick check, especially if you have moved the rack or if it lives somewhere that gets bumped. Twenty seconds with a screwdriver keeps the frame tight for years.\n\nOne habit worth building: rotate your stock. Push older bottles to the front tier and put new buys at the back. It stops a bottle getting forgotten behind the others for two years.\n\nBeyond wine\n\nThe open compartments do not know what you put in them. Taper candles store neatly on their sides. So do slim bottles of olive oil, vinegar, cordial or hot sauce. Rolled tea towels fit. Craft markers and brushes fit.\n\nTwo cautions. Check the size of whatever you are storing against the lattice opening, and do not load the tiers with anything unusually heavy. This is a light timber frame built to carry bottles, not tinned goods or tools.\n\nThe short version\n\nAn eight-bottle, three-tier timber rack is the practical answer to bottles scattered around the kitchen. It measures 42.5 x 15 x 28.3 cm, holds eight standard bottles flat so you can read every label, and sits on a bench, shelf or cabinet without any mounting.\n\nMeasure your space and your widest bottles first. Assemble it properly, tighten the screws, keep it out of heat and sun, and wipe it with a dry cloth now and then. Do that and you have a small piece of furniture that quietly does its job every day.", "llm_summary": "This is a KIRIGEN three-tier wooden wine rack (model TQ-XHJJ3-NA-US) that holds up to eight standard wine bottles horizontally. It measures 42.5 cm wide by 15 cm deep by 28.3 cm high, listed in imperial as 16.73 x 5.91 x 11.14 inches, and weighs 0.74 kg. The material is wood with a natural wood stain finish in a natural colour and modern style. It is freestanding and designed for countertop, cabinet or pantry-shelf use, and is not extendable. Assembly is required, and the package includes six wood boards, twelve screws with two spares, and an instruction manual. Each inner lattice opening is listed at about 3.5 x 3.5 inches. Care is to wipe with a dry cloth. Country of origin and warranty are not specified in this record.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Consumer Guarantees Act 1993 consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Wine Rack Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://winerack.net.nz/wooden-wine-rack-8-bottle-3-tier/", "canonical_url": "https://winerack.net.nz/wooden-wine-rack-8-bottle-3-tier/", "json_url": "https://winerack.net.nz/api/products/wooden-wine-rack-8-bottle-3-tier.json", "updated_at": "2026-10-10" }, { "id": "black-wine-rack-12-bottle", "sku": "black-wine-rack-12-bottle", "title": "Black 12-Bottle Freestanding Wine Rack", "slug": "black-wine-rack-12-bottle", "price": 111.99, "currency": "NZD", "availability": "in_stock", "category": "freestanding-wine-racks", "category_label": "Freestanding Wine Racks", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "2.09 kg", "images": [ "https://winerack.net.nz/dropship-images/freestanding-wine-racks/black-wine-rack-12-bottle/main-black-wine-rack-12-bottle.jpg", "https://winerack.net.nz/dropship-images/freestanding-wine-racks/black-wine-rack-12-bottle/black-wine-rack-12-bottle-2.jpg", "https://winerack.net.nz/dropship-images/freestanding-wine-racks/black-wine-rack-12-bottle/black-wine-rack-12-bottle-3.jpg", "https://winerack.net.nz/dropship-images/freestanding-wine-racks/black-wine-rack-12-bottle/black-wine-rack-12-bottle-4.jpg", "https://winerack.net.nz/dropship-images/freestanding-wine-racks/black-wine-rack-12-bottle/black-wine-rack-12-bottle-5.jpg" ], "description_short": "A slim metal frame in a matte black finish stacks twelve bottles on a small footprint, arrives ready to use with no assembly, and wipes clean with a dry cloth.", "description": "The problem with loose bottles\n\nWine has a habit of piling up in the least convenient places. A few bottles come home from a dinner, a case arrives at Christmas, someone brings a nice red to a barbecue, and before long there is a cluster of glass behind the pantry door and another one on the floor beside the fridge. Nobody planned it. It just happened.\n\nThe practical problems are small but constant. You cannot see what you have, so you buy more of the same. Bottles stand upright for months, which dries out corks. Someone knocks one over while reaching for the vacuum. And the whole arrangement looks untidy in a room you otherwise keep neat.\n\nA 12-bottle rack solves this without turning into a renovation project. It is big enough to clear the clutter and small enough that you do not need to redesign a corner of your kitchen to make room.\n\nHow a freestanding rack works\n\nThe idea is simple. A metal frame holds bottles on their sides in stacked tiers. Each bottle rests in its own cradle, so the weight of the one above never sits on the glass of the one below. You slide a bottle out and the rest stay exactly where they were.\n\nHorizontal storage is not just about saving space. When a bottle lies on its side, the wine stays in contact with the cork. That keeps the cork swollen and sealed, which is what stops air creeping in. Upright bottles let corks dry and shrink over time. For anything you plan to keep more than a few months, lying down is the better choice.\n\nThis particular rack measures 16 cm deep, 24.9 cm wide and 67.8 cm tall, and it holds twelve bottles. It weighs 2.09 kg empty. Nothing needs assembling, which is worth more than it sounds. Flat-pack racks are a known source of frustration, with bent brackets and mismatched screw holes. This one comes out of the box ready to load.\n\nWho it suits\n\nRenters do well with freestanding racks. There are no holes to drill, no wall anchors to patch over when you move, and no need to work out whether your wall is plasterboard or brick. You put it down and it works.\n\nSmall kitchens benefit from the depth more than anything. Sixteen centimetres is about the width of a dinner plate. It slots into the gap beside a fridge, under a bench overhang, or at the open end of a cabinet run where a wider unit would block traffic.\n\nApartment dwellers tend to be hunting for the best wine storage for apartments precisely because square metres are expensive. A tall, narrow rack gives you twelve bottles of capacity for roughly the floor space of a kitchen bin.\n\nIt also suits people who entertain regularly but do not cellar. If your collection turns over every few months, you do not need a temperature-controlled cabinet. You need somewhere sensible to keep the next dozen bottles.\n\nWho is it less suited to? Anyone building a genuine cellar, or anyone storing a lot of magnums and odd-shaped sparkling bottles. The maximum bottle diameter is not stated in the product record, so if your collection runs to unusual shapes, measure first.\n\nHow to choose the right size and spot\n\nStart with the tape measure, not the product page. Measure the width of the gap, the depth from wall to the front edge you are prepared to lose, and the height to any obstruction such as a benchtop, shelf or window sill.\n\nThen add a little margin. You want a few centimetres of clearance at the sides so you can actually reach in and lift bottles out. A rack wedged perfectly into its slot is a rack you will end up resenting.\n\nHeight is the measurement people most often get wrong. At 67.8 cm this rack will sit comfortably beside most benches, but it will not fit under a standard bench with a shelf above it. Check the clear interior height if you intend to put it inside a cupboard.\n\nCapacity deserves a quick think too. Twelve bottles sounds like a lot until you realise a single case is twelve. If you buy by the case and keep two on hand, you may want two racks side by side rather than one. Many shoppers comparing the best 12 bottle wine rack options end up buying a pair for exactly this reason.\n\nFinally, think about the surface. A level floor or a solid bench is ideal. Thick rugs, uneven tiles and wobbly side tables are not. A loaded rack holds a meaningful amount of weight, and you want that weight sitting flat.\n\nFinish and how it looks in a room\n\nBlack does a lot of quiet work. It sits against pale cabinetry without glaring, against timber without clashing, and against brick or concrete without looking out of place. If you have ever tried to match a timber-toned rack to existing furniture, you will know how often that goes slightly wrong. Black sidesteps the problem.\n\nThe style here is described as traditional, which in practice means a straightforward frame rather than anything decorative. That is usually what you want from storage. Furniture should be the thing you notice; storage should just hold things.\n\nOne small point on visual balance. A tall, narrow rack reads better when it sits next to something of similar height, like a fridge, a counter end or a sideboard. Placed in the middle of a long blank wall it can look a little stranded.\n\nLooking after it\n\nThe care instruction is simple. Wipe the frame with a dry cloth. Dust settles on horizontal bars and shows up more on a dark finish, so a quick pass every couple of weeks keeps it looking even.\n\nIf something sticky lands on the metal, use a barely damp cloth and dry it straight away. Moisture sitting on metal is what causes problems over months and years. Avoid scouring pads, abrasive powders and strong solvents, since those can leave scratches or dull patches that will not come back.\n\nWhen you move the rack, empty it first and lift rather than drag. That protects both the floor and the base of the frame. If you are putting it on timber or vinyl, small felt pads under the feet are a cheap bit of insurance.\n\nWhere you put the rack matters more for the wine than the metal. Keep it out of direct sunlight, away from the oven, and clear of heating vents. A cool, shaded corner is the goal. No room rack controls temperature, so pick the steadiest spot you have.\n\nA few practical habits\n\nLoad heavier and older bottles toward the bottom. It keeps the centre of gravity low and makes the rack feel more planted.\n\nTurn labels outward. Being able to read what you own without pulling bottles out is half the point of a rack, and it stops you disturbing wine you are not drinking that night.\n\nIf you keep both reds and whites, give each a tier or a side. It saves rummaging when guests arrive.\n\nRotate stock as you buy. New bottles go to one end, and you drink from the other. It is a small habit that stops a good bottle getting lost at the back for three years.\n\nThe short version\n\nThis is a straightforward metal rack that holds twelve bottles in a space 16 cm deep and 24.9 cm wide, standing 67.8 cm tall. It needs no assembly, weighs 2.09 kg empty, comes in black, and cleans up with a dry cloth. It stands on the floor or a bench with no fixings required.\n\nIt is a good fit if you want tidy, visible wine bottle storage in a kitchen, dining room or apartment, and you are drinking through your bottles rather than ageing them for a decade. Measure your space, allow a little clearance, and pick a cool spot out of the sun. That is most of the decision made.", "llm_summary": "The Black 12-Bottle Freestanding Wine Rack is an Amazon Basics metal rack (model WSF-031B, UPC 843019100084) that stores up to 12 wine or champagne bottles horizontally. It measures 16 cm deep by 24.9 cm wide by 67.8 cm high and weighs 2.09 kg. The finish is black, the style is described as traditional, and the mounting type is tabletop or freestanding. No assembly is required. Care is a wipe with a dry cloth. Country of publication is listed as China; country of origin is not specified in this record. Bottle neck clearance, maximum bottle diameter, load rating and warranty terms are also not specified in this record.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Consumer Guarantees Act 1993 consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Wine Rack Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://winerack.net.nz/black-wine-rack-12-bottle/", "canonical_url": "https://winerack.net.nz/black-wine-rack-12-bottle/", "json_url": "https://winerack.net.nz/api/products/black-wine-rack-12-bottle.json", "updated_at": "2026-10-10" }, { "id": "chrome-wine-rack-12-bottle", "sku": "chrome-wine-rack-12-bottle", "title": "Chrome 12-Bottle Freestanding Wine Rack", "slug": "chrome-wine-rack-12-bottle", "price": 148.99, "currency": "NZD", "availability": "in_stock", "category": "freestanding-wine-racks", "category_label": "Freestanding Wine Racks", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "2.24 kg", "images": [ "https://winerack.net.nz/dropship-images/freestanding-wine-racks/chrome-wine-rack-12-bottle/main-chrome-wine-rack-12-bottle.jpg", "https://winerack.net.nz/dropship-images/freestanding-wine-racks/chrome-wine-rack-12-bottle/chrome-wine-rack-12-bottle-2.jpg", "https://winerack.net.nz/dropship-images/freestanding-wine-racks/chrome-wine-rack-12-bottle/chrome-wine-rack-12-bottle-3.jpg", "https://winerack.net.nz/dropship-images/freestanding-wine-racks/chrome-wine-rack-12-bottle/chrome-wine-rack-12-bottle-4.jpg", "https://winerack.net.nz/dropship-images/freestanding-wine-racks/chrome-wine-rack-12-bottle/chrome-wine-rack-12-bottle-5.jpg" ], "description_short": "A slim floor-standing frame in a bright chrome finish, holding twelve bottles on their side in a footprint barely wider than a dinner plate, with no assembly needed.", "description": "The problem with loose bottles\n\nMost people do not set out to collect wine. It happens slowly. Someone brings a bottle to dinner, you buy a half case because it was cheaper that way, a bottle of fizz goes in the cupboard for an occasion that keeps not arriving. Within a year you have eight or ten bottles scattered across three rooms, standing upright in a cupboard that gets warm every time the oven runs.\n\nThat matters more than it sounds. Bottles stored standing up with natural cork slowly dry out at the seal, which lets air creep in. Bottles stored near heat age faster and less gracefully. And bottles stored in six different places mean you forget what you have, which is how a decent bottle ends up two years past its best behind the tinned tomatoes.\n\nA freestanding rack solves a storage problem and a memory problem at the same time. Everything lies down, everything is visible, and everything is in one place.\n\nWhat a 12-bottle tower actually does\n\nThis particular rack is a tall, narrow chrome frame that holds twelve bottles on their sides. It stands 69.9cm high, which is roughly bench height, and takes up 21cm by 17cm of floor. That is smaller than most kitchen bins.\n\nThe shape is the whole idea. Instead of asking for a shelf, a cupboard or a stretch of bench, it asks for a strip of floor that was almost certainly doing nothing. The gap at the end of a cabinet run. The space between the fridge and the wall. The corner of a dining room where a chair never quite fits. A rack like this turns dead space into twelve bottles of storage.\n\nBottles sit horizontally in cradles. For anything sealed with real cork, that is the right orientation, because the wine stays in contact with the cork and the cork stays swollen and airtight. For screw caps it makes no difference to the seal, but it is still the neatest way to stack bottles in a small frame.\n\nCapacity is worth thinking about honestly. Twelve bottles suits a household that buys by the half case and drinks through it over a few months. If you buy a case at a time and keep things for years, you will outgrow a twelve-bottle rack. If you keep two or three bottles on hand, you will never fill it. Twelve lands in the middle, which is why it is such a common number for the best 12 bottle wine rack designs.\n\nWhy chrome, and why it matters\n\nFinish is not just decoration on a wine rack. It decides whether the thing blends in or sticks out for the next decade.\n\nChrome is bright, reflective and genuinely neutral. It does not commit to a timber tone, so it will not fight with oak floors or walnut joinery. It does not commit to a colour, so it will not clash when you repaint. Against stainless appliances it reads as a matched set. Against white cabinetry it reads as a highlight. In a darker home bar it catches whatever light is going and stops the corner feeling heavy.\n\nThe practical trade-off with any bright metal is that it shows fingerprints and water marks. The fix is simple and the care instruction for this rack says it plainly: wipe with a soft damp cloth, dry it, and keep abrasive cleaners away. Scouring powders and rough pads will scratch a plated surface and the dullness does not come back out. A minute of wiping every few weeks is all it asks.\n\nMeasuring before you buy\n\nThis is where most wine rack purchases go wrong. People buy on capacity and discover the thing does not physically fit the spot they pictured.\n\nTake three measurements. Width of the gap, depth from wall to the front edge of whatever it sits beside, and height clearance if it is going under anything. For this rack you need 21cm of width and 17cm of depth, with 69.9cm of height clear above the floor. Add a couple of centimetres of width so you can actually slide bottles in and out without scraping knuckles on a wall.\n\nThen look at the floor itself. A flat, hard surface is ideal. Thick carpet lets a narrow base sink unevenly, and an uneven tile or a floorboard that has lifted will put the frame slightly out of plumb. Neither is dangerous, but a loaded rack sitting dead level is a more stable rack.\n\nThink about traffic too. The best floor standing wine rack placement is somewhere out of the main path through a room. A narrow tower in a doorway is an ankle magnet, especially for anyone carrying a plate.\n\nWho this suits\n\nApartment dwellers get the most out of a shape like this. When every square metre is accounted for, going vertical in 21cm of width is the only sensible way to store a dozen bottles. It is one of the best small apartment wine rack formats for exactly that reason.\n\nRenters do well with it too. There is nothing to mount, nothing to drill, no wall damage to patch at the end of a lease. You stand it up, you fill it, and when you move you unload it and carry it out under one arm.\n\nIt works for someone setting up a home bar who wants the bottles visible rather than hidden. Chrome and glass look good together, and twelve bottles on display do a lot more for a corner than twelve bottles in a cupboard.\n\nIt also makes a genuinely useful gift. There is no flat-pack to wrestle with, the look is neutral enough to suit almost any home, and it answers a problem the recipient has probably been quietly ignoring.\n\nWho it does not suit: serious collectors with dozens of bottles ageing for years, who need temperature control rather than a rack. And anyone with very young children in the house should think carefully about where a tall narrow tower of glass bottles sits.\n\nLoading it properly\n\nFill from the bottom up. This sounds obvious and plenty of people do the opposite because the top cradles are at a comfortable height. Keeping weight low makes the whole thing steadier, and that is worth more than saving yourself a small bend.\n\nPush each bottle in so it seats fully in the cradle rather than perching on the lip. A bottle that is half in will rock when you take out the one next to it.\n\nPut the bottles you are drinking soonest where you can reach them easily, and the ones you want to leave alone lower down or further back. A rack is a reminder system as much as a storage system, so the layout should reflect how you actually drink.\n\nKeep it away from the oven, the dishwasher and any sunny window. Heat ages wine quickly and sunlight does unpleasant things to white wine in particular. A cool, shaded spot with stable temperature beats a prettier spot that bakes every evening.\n\nCare over the long run\n\nChrome is low maintenance, not no maintenance. A damp cloth and a dry-off handles dust and the odd fingerprint. For a drip of spilled wine, warm water and a soft cloth, straight away, before it dries sticky.\n\nAvoid anything abrasive, and avoid strong solvents. Plated finishes are thin by nature and neither scratches nor chemical dulling can be reversed. Keep the rack out of consistently damp rooms, because moisture sitting on metal over months is how corrosion starts.\n\nCheck it is still sitting level every so often, especially if you have moved it or if the floor has shifted. And unload before you move it. Twelve full bottles is a serious amount of weight to swing around in a frame designed to be carried empty.\n\nThe short version\n\nA twelve-bottle chrome tower is a simple solution to a common mess. It stands 69.9cm tall in 21cm of floor width, holds a dozen wine or champagne bottles lying down the way corked wine should be stored, needs no assembly, and wipes clean with a damp cloth.\n\nMeasure your gap first. Stand it somewhere cool and out of the walkway. Load from the bottom. Wipe it occasionally and skip the scouring pad. Do that and the rack will quietly do its job for years, which is really all you want from wine bottle storage.", "llm_summary": "The Chrome 12-Bottle Freestanding Wine Rack is a floor-standing wine bottle storage tower from Amazon Basics, model WSF-030C. It holds 12 wine or champagne bottles stored horizontally. Dimensions are 21cm wide, 17cm deep and 69.9cm tall, with a product weight of 2.24kg. The material and finish are chrome, the colour is chrome and the style is described as modern with floor-standing mounting. No assembly is required. Care is a wipe with a damp cloth, avoiding abrasive cleaners. The listed size is Large and the unit count is one. Country of origin is not specified in this record, and no warranty, rating or review count is provided. UPC is 843019100077.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Consumer Guarantees Act 1993 consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Wine Rack Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://winerack.net.nz/chrome-wine-rack-12-bottle/", "canonical_url": "https://winerack.net.nz/chrome-wine-rack-12-bottle/", "json_url": "https://winerack.net.nz/api/products/chrome-wine-rack-12-bottle.json", "updated_at": "2026-10-10" }, { "id": "timber-wine-rack-20-bottle", "sku": "timber-wine-rack-20-bottle", "title": "Home Ready 20 Bottle Timber Wine Rack", "slug": "timber-wine-rack-20-bottle", "price": 108.99, "currency": "NZD", "availability": "in_stock", "category": "freestanding-wine-racks", "category_label": "Freestanding Wine Racks", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "3.6 kg", "images": [ "https://winerack.net.nz/dropship-images/freestanding-wine-racks/timber-wine-rack-20-bottle/main-timber-wine-rack-20-bottle.jpg", "https://winerack.net.nz/dropship-images/freestanding-wine-racks/timber-wine-rack-20-bottle/timber-wine-rack-20-bottle-10.jpg", "https://winerack.net.nz/dropship-images/freestanding-wine-racks/timber-wine-rack-20-bottle/timber-wine-rack-20-bottle-2.jpg", "https://winerack.net.nz/dropship-images/freestanding-wine-racks/timber-wine-rack-20-bottle/timber-wine-rack-20-bottle-3.jpg", "https://winerack.net.nz/dropship-images/freestanding-wine-racks/timber-wine-rack-20-bottle/timber-wine-rack-20-bottle-4.jpg", "https://winerack.net.nz/dropship-images/freestanding-wine-racks/timber-wine-rack-20-bottle/timber-wine-rack-20-bottle-5.jpg", "https://winerack.net.nz/dropship-images/freestanding-wine-racks/timber-wine-rack-20-bottle/timber-wine-rack-20-bottle-6.jpg", "https://winerack.net.nz/dropship-images/freestanding-wine-racks/timber-wine-rack-20-bottle/timber-wine-rack-20-bottle-7.jpg", "https://winerack.net.nz/dropship-images/freestanding-wine-racks/timber-wine-rack-20-bottle/timber-wine-rack-20-bottle-8.jpg", "https://winerack.net.nz/dropship-images/freestanding-wine-racks/timber-wine-rack-20-bottle/timber-wine-rack-20-bottle-9.jpg" ], "description_short": "Built from pine with a square 42 x 23.5 x 42 cm footprint and a simple assembly, this wooden wine rack turns a spare corner of bench or cupboard into proper bottle storage.", "description": "The problem with keeping wine on the floor\n\nMost wine collections start by accident. A bottle from dinner, a gift that was too good to open on a Tuesday, a case bought on holiday. Within a year there is a cluster of bottles standing upright in a corner of the pantry, half of them forgotten, a couple of them slowly going off because the cork dried out while they stood there.\n\nUpright storage is the quiet problem. A cork needs to stay damp to stay sealed. When a bottle stands for months, the cork dries, shrinks a little, and air creeps in. The wine does not spoil overnight, but it fades. You open it eighteen months later and it tastes tired for no reason you can point to.\n\nThe second problem is simpler. If you cannot see your bottles, you do not drink them in the right order. The one you bought to keep for a while gets opened on a weeknight, and the cheap one you meant to drink immediately sits for three years. A rack that shows you everything at once fixes a surprising amount of this.\n\nHow this rack works\n\nThis is a pine timber rack that holds twenty standard bottles lying on their sides, necks pointing out towards you. The whole thing measures 42 cm wide, 23.5 cm deep and 42 cm high and weighs 3.6 kg empty.\n\nLying the bottles down does two jobs. It keeps the wine against the cork, which is the storage condition every wine book recommends. And it packs far more bottles into the same floor space than standing them up, because you are using depth rather than height.\n\nNecks out matters too. You can read the labels from across the room, so you know what you have without pulling bottles around. It sounds like a small thing. It is the difference between a rack you use and a rack you load once and then ignore.\n\nThe construction is pine with a natural finish. Pine is a sensible choice for this kind of piece. It is light, which keeps the empty rack easy to carry and reposition, and it is forgiving of the occasional knock in a busy kitchen. The colour is pale and warm, which is why it tends to sit happily beside white cabinets, stone benchtops and darker furniture without fighting any of them.\n\nAssembly is required. The rack ships flat with a user manual in the box. Flat packing is what lets a timber piece this size travel without arriving marked up, and the cost of that is a short build at your kitchen table.\n\nWho it suits\n\nIf you keep between ten and twenty bottles at home and you want them out of the way but still visible, this size lands right in the middle. Twenty is a useful number. It covers a small working collection, a few bottles put aside for later, and the overflow after a birthday.\n\nIt suits apartments and smaller kitchens particularly well. The square 42 cm footprint is one of the main reasons people search for the best small wine rack rather than a tall floor cabinet. A tall rack dominates a room. This one disappears into a corner.\n\nIt also works for people who entertain a bit. Having twenty bottles sorted and reachable beats hunting through a cupboard while guests wait. Put it near the glasses and you have a functional little drinks station without buying furniture for it.\n\nIt is less suited to serious long-term cellaring. If you are laying down cases for a decade, you want a temperature-controlled space, not a rack in a kitchen. This is everyday storage done properly, which is what most households actually need.\n\nWhere to put it\n\nThree things matter when you choose a spot. Keep it cool, keep it out of direct sunlight, and keep it away from heat sources.\n\nSunlight is the one people underestimate. UV light breaks down wine faster than a few degrees of extra warmth, which is why so many bottles are made from dark glass. A sunny windowsill looks lovely and will quietly ruin your whites.\n\nHeat is the other. Avoid putting the rack directly beside an oven, above a dishwasher, or on top of a fridge where the motor pushes out warm air. A pantry floor, a lower sideboard shelf, a shaded bench corner or the inside of a cupboard all work better.\n\nVibration is a minor consideration. Constant shaking is not great for wine over long periods, so the top of a washing machine is a poor choice even if the space is tempting.\n\nFinally, make sure the surface is flat and level. Twenty full bottles is a real weight. On a level surface the load sits evenly across the frame. On a wobbly one, it does not.\n\nHow to choose between sizes\n\nCount what you actually keep, not what you imagine keeping. If your usual stock sits around eight to twelve bottles, twenty gives you headroom without a half-empty rack staring at you. If you regularly run thirty or more, look at a larger unit or plan to run two side by side.\n\nThen measure the space before anything else. Write down the width, the depth and the height you have free, and compare them to 42 x 23.5 x 42 cm. The depth catches people out. A standard bottle is around 30 cm long, so any rack that stores bottles sideways needs real depth to hold them, and 23.5 cm is a deliberately compact figure for that job.\n\nThink about material. A timber rack reads warmer and softer than metal, and natural pine is one of the more flexible shades to live with over time. Anyone comparing the best wooden wine rack for kitchen use usually ends up weighing look against footprint, and a compact square frame handles both.\n\nLast, consider whether you want it on show. If it will sit on a bench, the finish matters and you will want to dust it occasionally. If it is going inside a cupboard, the only thing that matters is whether it fits and holds the count you need.\n\nLooking after it\n\nThe care routine is short. Wipe the timber with a dry cloth when it gathers dust. For a mark, use a barely damp cloth and dry the area straight away rather than letting moisture sit on the grain.\n\nSpills deserve a quick response. Red wine on pale pine will stain if it soaks in, so blot immediately instead of wiping it around. Most spills leave nothing behind if you catch them in the first minute.\n\nKeep an eye on the fixings. Any assembled timber piece can loosen slightly in the first few months as it settles under load. A quick check and a gentle tighten once or twice a year is enough.\n\nAnd avoid damp. Pine does not enjoy sitting in a humid laundry or an unventilated cellar. A normal dry room is fine.\n\nThe short version\n\nTwenty bottles, pine timber, 42 x 23.5 x 42 cm, 3.6 kg empty, assembly required with a manual included. Bottles lie on their sides with the labels facing you, which protects the corks and makes the collection easy to read.\n\nIt is compact enough for an apartment bench and tidy enough to leave on display. Put it somewhere cool and shaded, keep the surface level, wipe it with a dry cloth now and then, and it will quietly do its job for years.\n\nIf the only thing holding you back is whether it fits, measure your space and tell us the numbers. We would rather talk you out of the wrong size than deal with a return.", "llm_summary": "The Home Ready timber wine rack (model FT-WWR03-20) is a freestanding wooden wine rack that holds 20 standard bottles. It is made from pine in a natural colour, with square industrial styling. Overall dimensions are 42 cm wide, 23.5 cm deep and 42 cm high, and the unit weighs 3.6 kg. Assembly is required and the box contains the rack plus a user manual. Bottles are stored horizontally with necks facing outward so labels stay visible and corks stay moist. Care is simple, wipe with a dry cloth. Colour is listed as natural and material as pine. GTIN, country of origin and warranty terms are not specified in this record. Available in 13 currencies with international delivery.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Consumer Guarantees Act 1993 consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Wine Rack Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://winerack.net.nz/timber-wine-rack-20-bottle/", "canonical_url": "https://winerack.net.nz/timber-wine-rack-20-bottle/", "json_url": "https://winerack.net.nz/api/products/timber-wine-rack-20-bottle.json", "updated_at": "2026-10-10" }, { "id": "wall-mounted-wine-bottle-rack", "sku": "wall-mounted-wine-bottle-rack", "title": "Wall Mounted Wine Bottle Rack (Set of 6)", "slug": "wall-mounted-wine-bottle-rack", "price": 205.99, "currency": "NZD", "availability": "in_stock", "category": "wall-mounted-wine-racks", "category_label": "Wall Mounted Wine Racks", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "68 g", "images": [ "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-mounted-wine-bottle-rack/main-wall-mounted-wine-bottle-rack.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-mounted-wine-bottle-rack/wall-mounted-wine-bottle-rack-2.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-mounted-wine-bottle-rack/wall-mounted-wine-bottle-rack-3.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-mounted-wine-bottle-rack/wall-mounted-wine-bottle-rack-4.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-mounted-wine-bottle-rack/wall-mounted-wine-bottle-rack-5.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-mounted-wine-bottle-rack/wall-mounted-wine-bottle-rack-6.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-mounted-wine-bottle-rack/wall-mounted-wine-bottle-rack-7.jpg" ], "description_short": "A set of six individually mounted aluminium cradles with a clear anodized finish and non-slip cork padding, so bottles sit level, stay put, and free up your bench and cupboards.", "description": "The problem with storing wine in a normal house\n\nWine is awkward to store. Bottles are heavy, they are the wrong shape for most shelves, and they really want to lie down rather than stand up. So they end up in the places where nothing else fits. The back of a low cupboard. A cardboard box in the laundry. A cluster on the bench that slowly migrates towards the toaster.\n\nNone of that is a disaster. But it has two real costs. The first is space, because wine takes up bench and cupboard room you would rather use for something you touch every day. The second is that you forget what you own. A bottle lying at the back of a cupboard behind the slow cooker is effectively invisible, and invisible bottles get drunk on a Tuesday instead of saved for the dinner you bought them for.\n\nA wall mounted wine bottle rack fixes both problems at once by moving the whole collection to a surface nobody else is using. Walls in kitchens and dining rooms are mostly empty from about waist height upwards. Put six bottles there and you have reclaimed a shelf, made your collection visible, and added something to look at.\n\nHow this style of rack actually works\n\nThis is not a single frame with six slots. It is six separate cradles that each mount on their own. Each one is a small semicircular piece of aluminium, 9.1 cm deep by 12.7 cm wide by 2.8 cm high, lined on the inside with non-slip cork padding. The bottle lies on its side, resting in the curve, with the cork lining cushioning the glass and adding enough grip to keep it from creeping.\n\nThe individual mounting is the part that matters most, and it is worth thinking about before you buy. A fixed frame locks you into one shape. Six separate pieces mean you choose the shape. You can run a straight horizontal line above a sideboard, stack a column in the narrow strip of wall beside the fridge, or scatter them in a staggered pattern so the bottles read as a wall feature rather than storage. You can also split the set, three in the kitchen and three in the dining room, if that suits the house.\n\nBecause there is no backing panel, the finished effect is that each bottle appears to float against the paint. That is the whole appeal of a floating wine rack arrangement, and it is why these look better on a plain wall than a busy one.\n\nWhy aluminium and anodizing matter\n\nThe cradles are solid aluminium with a clear anodized finish. Anodizing is an electrochemical process that thickens the natural oxide layer on the surface of the metal. In plain terms, it makes the outside harder and more resistant to marking than raw aluminium, and it holds a consistent colour instead of wearing patchy.\n\nThe practical result is a silver tone that is soft rather than mirror-bright. That is useful, because a highly polished finish fights with everything around it and shows every fingerprint. A quiet anodized silver sits comfortably next to stainless appliances, brushed tapware, white tile and pale timber. It also does not date the way a strong colour or a heavy industrial black can.\n\nAluminium is light, too. Each cradle weighs 68 grams, which is less than a small apple. All of the real load on your wall comes from the bottle itself, not the hardware, so the strength of the fixing is what you should think about rather than the weight of the rack.\n\nWho it suits\n\nThis kind of aluminium wine bottle rack earns its keep in small spaces more than large ones. If you have a dedicated cellar or a tall freestanding rack with room for fifty bottles, six wall cradles are decoration. If you live in an apartment, a unit, a terrace, or any kitchen where the bench is already crowded, they are genuinely useful.\n\nIt also suits people who buy wine a few bottles at a time rather than by the case. Six is roughly a fortnight's worth of interesting bottles for most households, which is the right number to have on display and within reach. Anything you are cellaring long term is better off somewhere dark and temperature-stable.\n\nFinally, it works for people who want their storage to look intentional. A row of bottles on an open shelf looks like clutter. The same bottles spaced evenly on a wall look like a decision.\n\nHow to plan your layout before you drill\n\nThis is the step people skip, and it is the one that makes the difference between a neat result and six slightly wonky holes.\n\nStart by laying your bottles out on the floor or a table in the pattern you are considering. Measure the widest point of the bottle, usually the shoulder, and add a few centimetres of clearance so neighbouring bottles never touch. Wine bottle diameters vary more than you would expect, with Burgundy-shaped bottles noticeably wider than Bordeaux ones, so plan around your widest bottle rather than your average one.\n\nNext, think about reach. Mount the row low enough that you can lift a bottle out without going up on your toes, and high enough that you are not knocking into it when you work at the bench. Above a sideboard or at upper-cupboard height usually lands about right.\n\nThen mark your positions in pencil on the wall, step back, and look at them from where you normally stand in the room. Adjust before you drill. A spirit level or a laser line is worth the trouble here, because the eye is very good at spotting a row of bottles that is slightly out of true.\n\nFitting it to your wall\n\nDrywall anchors, screws and a wrench come in the box, along with instructions. For plasterboard, the supplied anchors are what you want. Where one of your marked positions happens to line up with a stud, use the stud, because a screw into solid timber is always stronger than an anchor in board.\n\nFor brick, tile, concrete or render, you will need a masonry drill bit and plugs rated for that material. That is standard practice for anything you hang on a hard wall, and the cradle hardware itself does not change.\n\nTwo small habits help. Drill slowly and keep the bit level, so the hole does not open up and loosen the anchor. And check the fixings a few months after installation, then occasionally after that, because any wall mounted item benefits from a quick tighten over time.\n\nLiving with it and keeping it clean\n\nCare is simple. Wipe the aluminium with a soft damp cloth and dry it off. Avoid scouring pads, abrasive powders and harsh solvents, all of which can dull an anodized surface. Keep the cork padding dry, brush dust off it now and then, and wipe up any drips rather than letting the cork stay damp.\n\nWhen you take a bottle out, lift it rather than dragging it across the cradle. That protects the label and keeps the cork lining in good shape. If you ever rearrange the kitchen or move house, the cradles come off, the holes get filled, and they go back up somewhere new.\n\nOne thing worth knowing: bottles on display are exposed to light and to whatever the room temperature does across a day. For everyday drinking wine over a few weeks, that is fine. For a bottle you are saving for years, somewhere cool and dark is still the better home.\n\nThe short version\n\nSix individual aluminium cradles, each one lined with non-slip cork, each one mounted separately so you choose the pattern. Clear anodized silver finish, 9.1 x 12.7 x 2.8 cm per piece, 68 grams each, with drywall anchors, screws, a wrench and instructions in the box. Assembly is required, and it is a mount-and-tighten job rather than a build.\n\nIt suits small kitchens, apartments, home bars and dining rooms where bench space is tight and the walls are doing nothing. Measure your widest bottle, plan the layout on the floor first, use a level, and pick the right fixing for your wall type. Then wipe it with a damp cloth every so often and leave it alone.", "llm_summary": "The xympo wall mounted wine bottle rack (model KWR04-S6) is a set of six individual aluminium cradles, each holding one cylindrical bottle horizontally on a wall. Each cradle measures 9.1 cm deep by 12.7 cm wide by 2.8 cm high and weighs 68 grams. The finish is clear anodized aluminium in silver, with a semicircular shape and non-slip cork padding inside the cradle to cushion and grip the bottle. Drywall anchors, screws, a wrench and assembly instructions are included, and assembly is required. The racks are not extendable. Care is a wipe with a damp cloth. Country of origin, overall colour options beyond silver, and load rating are not specified in this record.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Consumer Guarantees Act 1993 consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "xympo", "gtin": null, "mpn": null, "condition": "new", "url": "https://winerack.net.nz/wall-mounted-wine-bottle-rack/", "canonical_url": "https://winerack.net.nz/wall-mounted-wine-bottle-rack/", "json_url": "https://winerack.net.nz/api/products/wall-mounted-wine-bottle-rack.json", "updated_at": "2026-10-10" }, { "id": "wall-wine-rack-16-tier-set", "sku": "wall-wine-rack-16-tier-set", "title": "16-Bottle Wall Mounted Wine Rack Set (2 Pack, 8 Tiers Each)", "slug": "wall-wine-rack-16-tier-set", "price": 88.99, "currency": "NZD", "availability": "in_stock", "category": "wall-mounted-wine-racks", "category_label": "Wall Mounted Wine Racks", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "3.06 kg", "images": [ "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-16-tier-set/main-wall-wine-rack-16-tier-set.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-16-tier-set/wall-wine-rack-16-tier-set-10.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-16-tier-set/wall-wine-rack-16-tier-set-2.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-16-tier-set/wall-wine-rack-16-tier-set-3.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-16-tier-set/wall-wine-rack-16-tier-set-4.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-16-tier-set/wall-wine-rack-16-tier-set-5.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-16-tier-set/wall-wine-rack-16-tier-set-6.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-16-tier-set/wall-wine-rack-16-tier-set-7.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-16-tier-set/wall-wine-rack-16-tier-set-8.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-16-tier-set/wall-wine-rack-16-tier-set-9.jpg" ], "description_short": "Two welded metal racks, eight tiers each, numbered parts and tools in the box, so a bare wall becomes a tidy wine bottle display in an afternoon.", "description": "The problem with storing wine on the floor\n\nMost homes do not have a cellar. What they have is a cupboard, a bit of bench, and maybe a cardboard box in the corner of the laundry. Wine ends up spread across all three. You buy a nice bottle, you put it somewhere sensible, and three weeks later you cannot remember where sensible was.\n\nFloor storage has a second problem. It takes up the one thing a small kitchen or apartment never has enough of, which is floor area. A freestanding wine cabinet can swallow half a metre of depth and still only hold a dozen bottles. Meanwhile there is a perfectly good stretch of empty wall beside the fridge doing nothing.\n\nThat is the gap this set fills. Two racks, eight tiers each, mounted flat to the wall. Sixteen bottles stored in roughly 10 cm of depth, labels facing out, everything visible without crouching or shuffling boxes.\n\nHow a tiered wall rack actually works\n\nThe design is simple on purpose. Each rack is a vertical metal spine with eight horizontal cradles welded along it. A bottle slides into a cradle and rests on its side, neck pointing out. The weight sits on the frame, the frame sits on the wall, and the wall does the real work.\n\nHorizontal storage is the traditional method and there is a reason for it. A natural cork needs to stay damp to hold its seal. Stand a corked bottle upright for a year and the cork dries, shrinks slightly, and lets air creep in. Lying flat keeps wine against the cork. Screw caps do not need this, but since most collections are a mix, horizontal is the safer default.\n\nThe staggered tiers also do something useful for daily life. You can read every label from across the room. No pulling four bottles out to find the one you wanted, no guessing from the foil colour.\n\nEach rack here is 71.7 cm tall, 27.5 cm wide and 10.3 cm deep, and the set weighs 3.06 kg before you add anything to it. The frame is metal with welded joints, finished in yellow, which is a deliberate choice. This is meant to be seen.\n\nWho this suits\n\nApartment dwellers get the most obvious benefit. When floor space is the scarce resource, going vertical is the only move left. A narrow strip of wall between a doorway and a cabinet is usually dead space, and 27.5 cm of width is not much to ask for.\n\nAnyone building a home bar corner will find it useful too. A wall mounted wine rack above a sideboard turns a plain surface into something that looks arranged rather than accumulated. The yellow finish reads as a design decision, not storage furniture trying to hide.\n\nIt also suits people who are only just starting to keep more than a couple of bottles around. Sixteen is a sensible first capacity. It is enough to hold a mixed case plus a few extras, without encouraging you to buy wine purely to fill empty slots.\n\nTwo groups should think twice. If you are storing bottles you intend to age for years, a wall in a warm kitchen is the wrong environment regardless of the rack, and you want a cool, dark, stable spot instead. And if your lease forbids any wall fixings at all, this is not the product for you, because it does need screws.\n\nChoosing where to put it\n\nStart with the wall, not the rack. Three things decide whether a spot works.\n\nFirst, what is behind the plaster. Timber studs are ideal. Brick and concrete are also fine and often easier, since masonry anchors are forgiving. Plain plasterboard with nothing behind it needs proper heavy-duty anchors rated well above the load you plan to hang. Sixteen full bottles across two racks adds up quickly, so this is not the place to improvise with whatever is left in the junk drawer.\n\nSecond, the conditions. Keep the rack away from direct sunlight, which fades labels and cooks wine. Keep it away from heat sources like an oven, a dishwasher vent or a radiator. A north-facing interior wall in a hallway often beats a sunny kitchen wall, even if the kitchen seems more convenient.\n\nThird, the clearance. You need room to slide a bottle in and out of every tier, including the top one. Hold a bottle up against the wall at the planned height before you drill. If you are stacking the two racks vertically, leave a gap between them so the lower rack's top tier is still easy to reach.\n\nFitting it without drama\n\nThe set arrives flat with numbered parts, an installation guide and installation tools. The numbering is the part that saves time, because you are matching labels rather than guessing which bracket goes where.\n\nDry-fit first. Assemble a rack on the floor, hold it against the wall, and mark your holes with a pencil while someone checks the level. A spirit level or a phone level app is worth the thirty seconds; a rack that is two degrees off looks wrong once bottles are in it, and bottles do not sit level on a crooked frame.\n\nDrill, plug, screw, then test with your hand before any wine goes near it. Push down on the frame with real weight. If anything shifts, pull it off and use bigger fixings. It is a five-minute fix now and a very bad afternoon later.\n\nThen load from the bottom up. Filling the top first makes the rack top-heavy while the lower fixings are still settling, and it makes you reach over full tiers.\n\nLiving with it\n\nDust gathers on horizontal metal, so give the frame a wipe with a damp cloth every few weeks and follow with a dry cloth to stop water marks. Skip abrasive pads and strong cleaners on the painted finish.\n\nLift bottles out rather than dragging them. Glass sliding against paint will eventually leave scuff lines on the cradles. It is a small habit that keeps the rack looking new for years.\n\nEvery few months, give the wall screws a check. Normal house movement and the odd knock can loosen a fixing slowly enough that you never notice until it matters. A quarter turn with a screwdriver is all it usually takes.\n\nIf you rotate stock, keep the oldest bottles at eye level where you will actually see them. Wine that ends up in the bottom tier tends to stay there.\n\nGetting more out of a two-pack\n\nBecause you get two racks, you have real flexibility. Side by side is the standard layout and gives you a clean block of sixteen. Stacked gives you a tall column for a narrow nook. Split across two rooms works if you keep whites in the kitchen and reds somewhere cooler.\n\nThe second rack does not have to hold wine at all. The same tiers take rolled towels in a bathroom, which is a tidy way to use a unit you have no wall space for in the kitchen. Tall pantry jars, water bottles and even rolled yoga mats have all been pressed into service. Just keep the weight sensible.\n\nThe short version\n\nThis is a sixteen-bottle wall mounted wine rack sold as two eight-tier units. Each is welded metal, 71.7 cm tall and only 10.3 cm deep, which is why it fits where other wine storage does not. The set weighs 3.06 kg, arrives with numbered parts, a guide and tools, and needs assembly plus wall mounting.\n\nSpend your effort on two things. Pick a wall that is cool, out of direct sun and solid enough to take the load, and buy fixings rated for the job. Do that and the rack will hold your wine, show your labels and free up your bench for the next decade.", "llm_summary": "The Hoctieon BAS2020G is a two-pack wall mounted wine rack set holding 16 bottles in total, with 8 tiers per rack. Each rack measures 10.3 cm deep by 27.5 cm wide by 71.7 cm tall and the item weight is listed as 3.06 kg. Construction is metal with a yellow finish in a modern style. Bottles sit horizontally, label out. The package includes 2 wine racks, an installation guide and installation tools; assembly and wall mounting are required and the racks are not extendable. Care is simple, wipe with a damp cloth then dry. Country of origin and the exact metal type are not specified in this record, and wall fixings suitable for your specific wall type may need to be sourced separately.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Consumer Guarantees Act 1993 consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Hoctieon", "gtin": null, "mpn": null, "condition": "new", "url": "https://winerack.net.nz/wall-wine-rack-16-tier-set/", "canonical_url": "https://winerack.net.nz/wall-wine-rack-16-tier-set/", "json_url": "https://winerack.net.nz/api/products/wall-wine-rack-16-tier-set.json", "updated_at": "2026-10-10" }, { "id": "wall-wine-rack-6-tier", "sku": "wall-wine-rack-6-tier", "title": "6 Tier Wall Mounted Wine Rack", "slug": "wall-wine-rack-6-tier", "price": 69.99, "currency": "NZD", "availability": "in_stock", "category": "wall-mounted-wine-racks", "category_label": "Wall Mounted Wine Racks", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "1.26 kg", "images": [ "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-6-tier/main-wall-wine-rack-6-tier.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-6-tier/wall-wine-rack-6-tier-10.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-6-tier/wall-wine-rack-6-tier-2.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-6-tier/wall-wine-rack-6-tier-3.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-6-tier/wall-wine-rack-6-tier-4.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-6-tier/wall-wine-rack-6-tier-5.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-6-tier/wall-wine-rack-6-tier-6.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-6-tier/wall-wine-rack-6-tier-7.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-6-tier/wall-wine-rack-6-tier-8.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-6-tier/wall-wine-rack-6-tier-9.jpg" ], "description_short": "Built from wood and metal with a rustic brown finish, this 60 cm tall wall mounted wine rack holds six bottles across six slim shelves and arrives with the instructions and tools you need to fit it.", "description": "The problem with wine and small homes\n\nWine takes up an awkward amount of room. A case sits in the hallway for a week, then moves to the bottom of a cupboard, then gets half forgotten behind the stockpot. Bottles end up upright in a corner collecting dust, and the nice one you were saving gets opened by accident on a Tuesday because nobody could see the label.\n\nFloor racks solve part of this and create a new problem. They eat floor space, which is the most expensive space in any kitchen or dining room. In a flat or a terrace, there often simply is not a spare square metre for a wine cabinet.\n\nThat is where a wall wine rack 6 tier design comes in. It takes the one surface most people never use, and turns a 60 cm tall strip of it into storage for six bottles. The rack is only 10.2 cm deep, so it sits close to the wall and does not catch shoulders or shopping bags as you pass.\n\nHow a vertical rack works\n\nThe idea is simple. Six shelves stack in a column inside a metal frame. Each shelf takes one bottle lying on its side, with the base against the wall and the neck pointing outward.\n\nHorizontal storage is not just about saving space. For bottles with natural cork, lying flat keeps the wine in contact with the cork so it does not dry out and shrink. A shrunken cork lets air in, and air is what turns a nice red into something that tastes like a wet cardboard box. Screw caps do not care either way, but the horizontal layout still shows the label off better.\n\nThe combination of materials matters too. The shelves here are wood, which gives the rack its warmth and visible grain. The frame is metal with a finish applied over it, and that is the part doing the structural work. Wood alone at this width would want to flex under six bottles. Metal alone would look like a tool rack. Together they get you something that holds weight and still looks like furniture.\n\nAt 1.26 kg empty, the rack itself adds almost nothing to the load. Nearly all the weight your fixings carry comes from the bottles.\n\nWho this suits\n\nThis rack is a good fit if you drink wine regularly rather than collect it. Six bottles is roughly half a case. It is enough to keep a decent spread of reds, whites, and something for guests, without turning your wall into a warehouse.\n\nIt suits small kitchens, dining nooks, and studio apartments where a cabinet is out of the question. It suits anyone who wants the bottles visible, because seeing the labels changes how you use your wine. You stop forgetting what you own.\n\nIt is also a reasonable choice for a bar corner, a home office with a drinks shelf, or a hallway between the kitchen and the dining table. Some of the best wine storage for apartments ideas are simply about moving things upward.\n\nIt is less suited to serious cellaring. If you are laying bottles down for five or ten years, you need stable temperature, darkness, and humidity, which no open wall rack provides. Keep this one for the bottles you will drink within a year or so.\n\nChoosing the right spot\n\nWalk the room before you drill. Look for a vertical strip at least 30 cm wide and 70 cm tall, which gives the 27.5 by 60 cm rack a little breathing room on each side.\n\nThink about sunlight. Direct afternoon sun through a window heats bottles and fades labels. A north or shaded wall is kinder. Think about heat too. The wall beside an oven, a radiator, or a fridge exhaust is a poor choice, because wine hates temperature swings more than it hates being slightly warm.\n\nConsider traffic. A narrow hallway at shoulder height will get knocked. Above a sideboard, beside a pantry door, or in the gap between a window and a corner are all safer.\n\nHeight is a judgement call. Setting the top shelf near standing eye level makes the display read properly and keeps the lower bottles at a comfortable reach. If children are around, mounting a little higher keeps bottles out of grabbing range.\n\nFitting it properly\n\nThis is the part people rush, and it is the part that matters.\n\nFirst, work out what your wall is made of. Tap it. A hollow sound usually means plasterboard, a dull thud usually means masonry or a solid render. Plasterboard needs either a stud to screw into or proper hollow wall anchors rated for the load. Masonry needs plugs and a masonry drill bit.\n\nThe rack fixes with multiple screws rather than a single bracket, which is a good thing. Spreading the load across several points stops the frame from twisting and keeps the column vertical. Use every fixing hole provided. Skipping one to save a minute is a false economy.\n\nHold the rack against the wall, use a spirit level, and mark your holes with a pencil. A second pair of hands helps enormously here. Drill, fit your plugs or anchors, then drive the screws in firmly without overtightening. Overtightening into plasterboard strips the anchor and you start again.\n\nAssembly of the rack itself comes first. The parts are numbered and the guide takes you through the order, and the fitting tools are supplied. Most people have it together on the kitchen table in twenty minutes.\n\nOnce it is up, load it bottom first. Watch for any movement. If anything shifts, take the bottles off and check the fixings before you trust it.\n\nLiving with it\n\nDust settles on the top edge of each shelf. A dry cloth once a fortnight handles it. Do not soak the wood and do not reach for strong cleaners, because the finish is there to protect the timber and solvents will strip it.\n\nRotate your stock. Bottles you want to drink soon go in the lower tiers where they are easiest to grab. The one you are saving goes up top where it is slightly more trouble to reach, which is a surprisingly effective deterrent.\n\nCheck the screws after a few months. Any wall fixing carrying weight will settle slightly over time, and a quarter turn now and then keeps everything tight.\n\nIf you later decide six bottles is not enough, fit a second rack beside the first. Two or three columns side by side give you a proper wine bottle display without any of them individually looking oversized. Keep the gaps between them even and the whole thing reads as intentional.\n\nAnd if the wine runs out for good, the shelves hold rolled towels neatly. Move it to the bathroom and it works as a narrow towel shelf. That kind of second use is worth more than it sounds, because it means the rack does not end up in a cupboard the moment your habits change.\n\nThe short version\n\nSix bottles, one per tier, in a column 27.5 cm wide and 60 cm tall that only projects 10.2 cm from the wall. Wood shelves, metal frame, rustic brown finish. Assembly required, with numbered parts, an instruction guide, and tools in the box.\n\nPick a shaded wall away from heat and traffic. Use fixings that match your wall type, use all of them, and check them level before you load it. Wipe it with a dry cloth and keep the bottles you plan to drink soon at the bottom.\n\nIt is a simple piece of kit that fixes a specific annoyance, which is wine bottles with nowhere sensible to live. Done right, it also looks good on the wall.", "llm_summary": "The Hoctieon 6 Tier Wall Mounted Wine Rack (model BAS2019B-AU) is a vertical wall mounted wine rack holding six bottles, one per tier. It measures 10.2 cm deep by 27.5 cm wide by 60 cm high and weighs 1.26 kg. Construction is listed as metal and wood in a rustic brown finish, classic style, rectangular shape. Assembly is required and the box includes the rack, an installation guide and installation tools. Parts are numbered. Care is to wipe with a dry cloth. The rack is not extendable. Country of origin, GTIN, warranty terms and weight capacity per shelf are not specified in this record. The same tiers can be used to hold rolled towels in a bathroom.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Consumer Guarantees Act 1993 consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Wine Rack Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://winerack.net.nz/wall-wine-rack-6-tier/", "canonical_url": "https://winerack.net.nz/wall-wine-rack-6-tier/", "json_url": "https://winerack.net.nz/api/products/wall-wine-rack-6-tier.json", "updated_at": "2026-10-10" }, { "id": "wall-wine-rack-with-glass-holder", "sku": "wall-wine-rack-with-glass-holder", "title": "Wall Wine Rack with Glass Holder", "slug": "wall-wine-rack-with-glass-holder", "price": 173.99, "currency": "NZD", "availability": "in_stock", "category": "wall-mounted-wine-racks", "category_label": "Wall Mounted Wine Racks", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "4.54 kg", "images": [ "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-with-glass-holder/main-wall-wine-rack-with-glass-holder.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-with-glass-holder/wall-wine-rack-with-glass-holder-2.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-with-glass-holder/wall-wine-rack-with-glass-holder-3.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-with-glass-holder/wall-wine-rack-with-glass-holder-4.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-with-glass-holder/wall-wine-rack-with-glass-holder-5.jpg", "https://winerack.net.nz/dropship-images/wall-mounted-wine-racks/wall-wine-rack-with-glass-holder/wall-wine-rack-with-glass-holder-6.jpg" ], "description_short": "Two engineered wood shelves hold up to 12 bottles while the metal rails below cradle your glasses upside down, keeping benchtops clear and your collection on show.", "description": "The problem with storing wine in a normal kitchen\n\nWine takes up more room than people expect. A case is 12 bottles, and 12 bottles laid flat in a cupboard swallow an entire shelf. Stand them up and they tip. Leave them on the bench and you lose the only clear surface you had. Then there is the stemware, which is tall, awkward and fragile, and which seems to attract dust no matter where you put it.\n\nMost homes end up with the collection scattered. Two bottles by the kettle, four in the pantry, a half case still in the delivery box under the stairs, and the good glasses in a cupboard you need a step stool to reach. You stop knowing what you own. Bottles you meant to keep get opened on a Tuesday because they were the ones within reach.\n\nA wall wine rack with glass holder fixes this by moving everything to a surface you were not using anyway. The wall above a sideboard, the gap beside a fridge, the end of a galley kitchen, the stretch of hallway heading to the dining room. None of that space was doing anything. Hang a rack there and suddenly your bottles are visible, your glasses are hanging ready, and your bench is clear.\n\nHow this rack works\n\nThe design is simple, which is why it works. Two engineered wood shelves run horizontally across the unit. Bottles lie on their sides across them, cradled so they cannot roll off. Between the two shelves you get a total capacity of 12 bottles, a full case, which is a sensible number for a home that buys wine regularly without running a cellar.\n\nLying bottles flat is not just about saving space. With cork-sealed wine, keeping the bottle horizontal means the wine stays in contact with the cork. A cork that stays damp stays swollen, and a swollen cork keeps air out. Air is what turns good wine into something you tip down the sink. If everything you drink has a screw cap, this matters less, but horizontal storage is still the tidier way to stack bottles.\n\nUnderneath the bottle shelves sit the metal stemware rails. Glasses slide in stem-first and hang upside down, held at the base of the stem. Hanging them bowl-down keeps dust out of the part you drink from, and it keeps delicate rims away from hard surfaces. It also gets your glasses out of the cupboard, which frees up another shelf.\n\nThe unit is built from metal and engineered wood, with a painted finish on the metal. It measures 80.5 cm wide, 49 cm deep and 20 cm high, and weighs 4.54 kg empty. The brown colour and the vintage-leaning shape keep it from looking like office shelving, which matters when it is going on a wall people can see.\n\nWho it suits\n\nApartment dwellers get the most out of a hanging wine rack. When floor area is the thing you do not have, vertical storage is the only sensible answer. The same logic applies to small terraces, narrow kitchens and share houses where cupboard space is contested.\n\nIt also suits people who entertain. Having bottles and glasses together in one spot turns pouring a drink into a two-second job instead of a cupboard hunt. Guests can serve themselves without opening every door in your kitchen.\n\nThen there is the display side. If you collect wine, or if someone keeps giving you nice bottles you are saving for an occasion, a wine bottle display rack gives those bottles somewhere to be seen. Labels face out. You remember what you have. It is a far better outcome than a box in the laundry.\n\nCafes, small bars, restaurants and offices use racks like this behind counters and along feature walls. The vintage finish reads as warm rather than industrial, which fits most hospitality fit-outs without clashing.\n\nChoosing the right spot\n\nStart with a tape measure. The rack is 80.5 cm wide, so find a clear run of wall that gives you that plus a little breathing room either side. Check what is above and below. If it is going over a bench, you need enough clearance to lift a bottle out without catching the splashback or a range hood.\n\nHeight is the next call. Set the glass rails where you can reach a glass comfortably without stretching, usually around eye level for an adult. If small children are in the house, go higher so bottles and glassware are out of reach. Hold the rack against the wall first, pencil a few marks, and step back to look before you drill anything.\n\nThink about what is around it. Keep the rack away from ovens, dishwashers, heaters and windows that get strong afternoon sun. Heat and light are hard on wine. A steady, cool, shaded wall is kinder to your bottles than a sunny one, even if the sunny one looks better in photos.\n\nFixings and installation\n\nThe box includes assembly instructions and tools. Building the rack itself is the easy part. Mounting it correctly is where the care goes.\n\nThe empty rack is 4.54 kg. Load it with 12 bottles and a set of glasses and you are carrying a good deal more than that on the wall. Your fixings need to be rated well above the loaded weight, not the empty weight. That is the single most common mistake people make with any wall mounted wine rack.\n\nOn plasterboard, aim for the studs if you can. If the stud spacing does not line up, use heavy-duty hollow wall anchors designed for real loads, not the small plastic plugs that come with picture hooks. On brick or concrete, use masonry plugs and a hammer drill, and you will have a rock-solid result. On tile, drill slowly with a tile bit and start with a small pilot hole to avoid cracking.\n\nGet the rack level before the final tighten. A spirit level or a phone app is enough. A rack that sits half a degree off will nag at you every time you walk past, and it is far easier to fix now than after the holes are drilled.\n\nLiving with it\n\nLoading is straightforward. Bottles go in label-up so you can read them. Put the ones you plan to drink soon at the easy-reach end, and the ones you are saving further along. Glasses slide into the rails stem-first, and a gentle push is all it takes.\n\nCleaning is light work. Wipe the wood shelves with a dry or barely damp cloth, then dry them straight away, because moisture is what damages engineered wood over time. The metal rails take a soft cloth and a mild household cleaner. Skip steel wool and scouring powder, which will mark the painted finish.\n\nEvery few months, give the fixings a check. A quarter turn on a screw that has worked loose takes seconds and prevents the kind of problem nobody wants on a wall full of glass. While you are there, run a cloth over the bowls of any glasses that have been hanging a while.\n\nIf you outgrow 12 bottles, the simplest move is a second unit beside the first. Two racks along one wall give you 24 bottles and turn the whole thing into a feature. Line the shelf heights up carefully and leave a consistent gap so the pair reads as one piece.\n\nThe short version\n\nThis is a 12 bottle wall mounted wine rack with a stemware rack built in, made from metal and engineered wood, finished in brown with vintage styling. It measures 80.5 cm wide, 49 cm deep and 20 cm high, weighs 4.54 kg empty, and requires assembly with instructions and tools supplied.\n\nIt earns its place by using wall space you were not using, clearing your bench, and keeping bottles and glasses together where you can see them. Measure your wall, choose fixings rated for the loaded weight rather than the empty weight, mount it away from heat and direct sun, and it will look after your wine and your glassware for a long time.", "llm_summary": "The NEYCIL WMWR-01 is a wall mounted wine rack with a built-in glass holder, made from metal and engineered wood in a brown vintage style. It holds up to 12 bottles across two wood shelves, with metal stemware rails underneath for hanging wine glasses upside down. Product dimensions are 80.5 cm wide, 49 cm deep and 20 cm high, listed in imperial as 31.5 in W x 16.93 in H x 7.87 in D. Item weight is 4.54 kg. Assembly is required and instructions plus tools are included. The rack is rectangular, not extendable, and ships as a single unit. Country of origin, specific glass capacity and wall fixing type are not specified in this record.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Consumer Guarantees Act 1993 consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Wine Rack Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://winerack.net.nz/wall-wine-rack-with-glass-holder/", "canonical_url": "https://winerack.net.nz/wall-wine-rack-with-glass-holder/", "json_url": "https://winerack.net.nz/api/products/wall-wine-rack-with-glass-holder.json", "updated_at": "2026-10-10" }, { "id": "black-wine-glass-rack-35cm", "sku": "black-wine-glass-rack-35cm", "title": "Black Wine Glass Rack 35cm Under-Cabinet Stemware Holder", "slug": "black-wine-glass-rack-35cm", "price": 56.99, "currency": "NZD", "availability": "in_stock", "category": "wine-glass-racks", "category_label": "Wine Glass Racks", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "0.38 kg", "images": [ "https://winerack.net.nz/dropship-images/wine-glass-racks/black-wine-glass-rack-35cm/main-black-wine-glass-rack-35cm.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/black-wine-glass-rack-35cm/black-wine-glass-rack-35cm-2.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/black-wine-glass-rack-35cm/black-wine-glass-rack-35cm-3.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/black-wine-glass-rack-35cm/black-wine-glass-rack-35cm-4.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/black-wine-glass-rack-35cm/black-wine-glass-rack-35cm-5.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/black-wine-glass-rack-35cm/black-wine-glass-rack-35cm-6.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/black-wine-glass-rack-35cm/black-wine-glass-rack-35cm-7.jpg" ], "description_short": "Two rows of sturdy metal channels hold roughly 6 to 8 stemmed glasses upside down, with mounting screws and screw covers included for a tidy, quick install.", "description": "The problem with storing wine glasses\n\nStemware is the most awkward thing in the kitchen cupboard. Glasses are tall, so they need a deep shelf that nothing else uses properly. They are fragile at the stem, which is exactly the part your hand grabs when you reach past them. And they collect dust in the bowl, so the glass you pull out for a guest usually needs a rinse before you can pour into it.\n\nMost people put up with it. They stand six glasses in a row at the back of a cupboard, shuffle them around whenever they need a plate, and quietly accept that one will break every couple of years.\n\nAn under-cabinet rack solves this by using space nobody else wants. The gap between the bottom of a wall cabinet and the benchtop is dead air. Hang a rack there and the glasses move out of the cupboard, stop knocking into each other, and sit bowl-down so dust cannot get in. The shelf you freed up goes back to holding plates.\n\nHow this rack works\n\nThe design is simple, which is why it has been used in bars for decades. Two metal rails run parallel along the 35cm length of the rack, with a gap between them. The stem of the glass passes down through that gap and the foot rests on top of the rails. Gravity does the rest.\n\nYou load the glasses from the open end and slide them along. Each one hangs free, bowl pointing at the floor, with nothing touching the rim. Because the glasses hang rather than stand, they cannot tip, and because each one has its own space in the channel, the bowls do not clink.\n\nThis particular rack has two rows across its 21.6cm width, so you get two parallel lines of hanging glasses. Capacity sits around 6 to 8 glasses. The spread in that number is down to base diameter. A set of narrow champagne flutes has small feet and packs tightly. A set of broad burgundy glasses has feet nearly twice the width and will fill the same track with fewer glasses. If you have a specific set in mind, measure the foot of one glass and divide 35 by that figure to get a rough per-row count.\n\nThe rack itself is small. It projects 5cm down from the mounting surface and weighs 380 grams, so it is not a structure that dominates a kitchen. In black metal, it mostly disappears under a cabinet and the glasses become the visible part.\n\nWho it suits\n\nAnyone short on cupboard space is the obvious candidate. Small kitchens, apartments and rentals benefit most, because the under-cabinet gap is often the only unused storage left.\n\nHome bar builders are the second group. If you have a drinks trolley, a sideboard with bottles on it, or a corner set up for mixing, a hanging rack above that area puts glasses exactly where you need them and makes the corner look intentional. The best hanging wine glass holder is the one within arm's reach of the pour.\n\nHosts with nice glassware are the third. If you own a set of good stems, keeping them in a cupboard means you only see them when guests arrive. Hanging them turns them into part of the kitchen. They also stay cleaner, which matters more than people expect.\n\nIt also works in commercial settings. Cafes, small restaurants and bar service areas use this style of rack constantly, because fast access and no dust are the two things that matter behind a counter.\n\nChoosing the right spot\n\nBefore you drill anything, work through four checks.\n\nFirst, length. The rack needs a clear 35cm run of mounting surface. Check that nothing interrupts that span, no hinge plates, no cabinet lighting, no rangehood ducting.\n\nSecond, clearance. Measure from the underside of the cabinet down to your benchtop, then measure your tallest glass and add the 5cm rack depth. If the total is more than your clearance, the glasses will sit on the bench. Most kitchens with standard cabinet heights have plenty of room, but a low cabinet over a bench with a toaster underneath can get tight.\n\nThird, mounting strength. Screws need something solid to bite into. A proper cabinet base panel, a thick timber shelf, or a stud behind plasterboard are all fine. A thin veneer panel, a hollow shelf or bare plasterboard are not. If your surface is thin, fix a timber batten first and mount the rack to that.\n\nFourth, traffic. Think about where heads go. A rack over a benchtop is fine because nobody walks there. A rack over a walkway or at the edge of an island can catch someone standing up. Set it back from edges.\n\nFitting it\n\nThe job needs a drill, a screwdriver, a pencil and a tape measure. Mounting screws and screw covers are included in the box.\n\nHold the rack against the surface and mark the screw positions. Check your marks are square to the cabinet edge, since a rack mounted slightly off-angle is obvious once glasses hang from it. Drill pilot holes a little smaller than the screw shank so the timber does not split. Drive the screws, starting all of them loosely before tightening any one fully, which lets you correct a small alignment error. Then press the screw covers into place.\n\nHang one glass and check it swings free and sits level. Then load the rest. If the end glass is hard to slide out, you have mounted the rack too close to a wall or cabinet return, so shift it along before you fill it.\n\nLooking after it\n\nMaintenance is light. Wipe the rails with a damp cloth every few weeks to clear kitchen film, especially if the rack sits near a cooktop where grease travels further than you would think. Mild dish soap handles anything stubborn. Dry it afterwards rather than letting water sit on the metal.\n\nKeep abrasive pads and strong solvents away from it. A painted finish will scratch, and once it does, the mark is permanent.\n\nLet glasses drip for a minute after washing before you hang them. Water pooling on the bars is the single most likely cause of finish damage over several years.\n\nEvery few months, give the mounting screws a quarter turn to check they are still tight. Timber moves with humidity and screws can loosen slowly. It takes ten seconds and it is the difference between a rack that lasts and a rack that lets go.\n\nSmall details worth knowing\n\nIf 35cm is not enough length, mount two racks end to end with a small gap between them. The gap makes the end glasses easier to grip.\n\nIf you only drink from one type of glass, you will get more on the rack than the stated range suggests, because uniform feet pack efficiently. Mixed sets waste a little track.\n\nIf your glasses rattle when the cabinet door shuts, move the rack 2cm further back from the door. The vibration drops off quickly with distance.\n\nThe short version\n\nThis is a 35cm, two-row, black metal rack that mounts under a cabinet or shelf and hangs roughly 6 to 8 stemmed glasses upside down. It weighs 380 grams, projects 5cm, and comes with mounting screws and covers. Assembly means fitting it to a solid surface with a drill.\n\nIf your glasses are crowding a cupboard shelf and you have unused space under a cabinet, this trades one for the other in about twenty minutes. Measure your clearance, check your mounting surface is solid, and the rest is straightforward.", "llm_summary": "The Dianoo Black Wine Glass Rack 35cm is an under-cabinet stemware holder made from metal with a black finish. It measures 5cm deep by 21.6cm wide by 35cm high and weighs 0.38kg. The rack has two rows and holds approximately 6 to 8 stemmed glasses, with the exact number depending on the base diameter of each glass. Glasses hang upside down, suspended by their bases, which keeps bowls clear of dust and knocks. Mounting screws and screw covers are included and assembly is required. It is intended for indoor use in kitchens, dining rooms, bars and restaurants. Model number WGRLUO3502BL. Country of origin and warranty details are not specified in this record.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Consumer Guarantees Act 1993 consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Wine Rack Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://winerack.net.nz/black-wine-glass-rack-35cm/", "canonical_url": "https://winerack.net.nz/black-wine-glass-rack-35cm/", "json_url": "https://winerack.net.nz/api/products/black-wine-glass-rack-35cm.json", "updated_at": "2026-10-10" }, { "id": "gold-wine-glass-rack-30cm", "sku": "gold-wine-glass-rack-30cm", "title": "Gold Wine Glass Rack 30cm (3 Pack Under-Cabinet Stemware Holder)", "slug": "gold-wine-glass-rack-30cm", "price": 74.99, "currency": "NZD", "availability": "in_stock", "category": "wine-glass-racks", "category_label": "Wine Glass Racks", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "454 g", "images": [ "https://winerack.net.nz/dropship-images/wine-glass-racks/gold-wine-glass-rack-30cm/main-gold-wine-glass-rack-30cm.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/gold-wine-glass-rack-30cm/gold-wine-glass-rack-30cm-2.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/gold-wine-glass-rack-30cm/gold-wine-glass-rack-30cm-3.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/gold-wine-glass-rack-30cm/gold-wine-glass-rack-30cm-4.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/gold-wine-glass-rack-30cm/gold-wine-glass-rack-30cm-5.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/gold-wine-glass-rack-30cm/gold-wine-glass-rack-30cm-6.jpg" ], "description_short": "A three-pack of brushed gold alloy steel rails, each 30.5cm deep, that screw under a cabinet or shelf in minutes and hold roughly three to four glasses per rail.", "description": "The problem with storing wine glasses\n\nWine glasses are badly behaved objects. They are tall, so they do not fit under a normal shelf gap. They are fragile, so you cannot stack them. They are top-heavy, so they tip when you slide the one behind them out. The usual result is a back row of glasses that nobody ever uses, slowly filling with dust, while the two or three you actually like live permanently on the drying rack.\n\nThat is the gap an under cabinet wine glass rack fills. Instead of asking a shelf to do a job it is bad at, you hang the glasses upside down by the foot in the empty space beneath the cabinet. The bowls point down, dust stays out, and every glass is visible and reachable with one hand. It is how bars have done it for decades, and the reason is simple. It works.\n\nHow a hanging stemware rail works\n\nThe design is about as simple as hardware gets. Each rail has slots running along its length. The foot of the glass slides into a slot, the stem sits in the gap, and the bowl hangs clear below. Gravity does the rest. Because the glass is held at its strongest point, the foot, there is no stress on the delicate part.\n\nThis set gives you three rails, each 30.5cm deep, 10.8cm wide and 5.1cm high. Depth is the measurement that matters for capacity, since that is the length of hanging run you get. In most kitchens one rail takes about three to four standard wine glasses. Slim flutes pack in tighter. Wide bowled reds take more room, so expect fewer.\n\nThe low 5.1cm height is worth noting. A deep rack eats into the space between your cabinet and your bench, and if you have a kettle or coffee machine under there you will notice. A shallow profile keeps the glasses close to the cabinet and leaves more usable air below.\n\nMaterials and finish\n\nThe rails are alloy steel with a brushed gold finish. Steel matters here because the rail has to stay straight under load. A flimsy rail bows in the middle, and once it bows the glasses start to lean and clink against each other. Alloy steel holds its shape.\n\nThe brushed finish is the practical choice for anything you touch every day. A mirror-polished rail looks great in photos and then shows every fingerprint the moment someone reaches for a glass. Brushed metal scatters light instead of reflecting it, so smudges disappear. Gold also happens to sit well against most cabinet colours. It warms up a white kitchen and adds contrast against dark timber or navy joinery.\n\nIf you already have brushed gold kitchen hardware, handles, tapware or pendant lights, this will sit in the same family. Gold tones do vary between manufacturers though, so if you want an exact match hold the rail against your existing fittings in daylight before you commit.\n\nWho this suits\n\nThe clearest case is anyone short on cupboard space. Apartments, galley kitchens, converted garages, student flats. If you can name every centimetre of shelf you own, moving stemware into overhead dead space is an easy win.\n\nThe second group is people building a drinks corner. A row of hanging glasses above a bar cart or sideboard does more for the look of the space than almost anything else at this price. It signals that this corner is for drinks, not storage. Three rails is enough to make that read properly.\n\nThird, there are the people who have nice glasses and never use them because getting them out is a chore. If your good stemware lives in a box in the garage, hanging it where you can see it changes the odds considerably. Glasses that are visible get used.\n\nWho it does not suit: anyone without a suitable overhang. You need the underside of a cabinet or a solid shelf with timber thick enough to take a screw. A bare plaster wall is not what this is made for. Outdoor kitchens are also out, since the product is specified for indoor use.\n\nHow to choose and plan the install\n\nStart with your glasses, not the rack. Pull out the widest glass you own and measure the diameter of the base and the widest point of the bowl. The base width tells you how many fit along a 30.5cm rail. The bowl width tells you how far apart to space the rails so the glasses do not knock together.\n\nNext, check your overhang. Look at the underside of the cabinet where you plan to mount. You want solid timber, and you want to know roughly how thick it is so your screws bite without punching through into the shelf above. Six screws come in the box, so you have enough for all three rails.\n\nThen plan the layout. You have options. Three rails side by side give you a bar-style block of hanging glassware above one bench. Or spread them, two in the kitchen and one near the dining room, if your glasses live in different places. Nothing in the design forces a single arrangement.\n\nFinally, think about height. Hang a glass on the rail before you fix it and see how low the bowl sits. You want clearance above the bench for whatever lives there. This is the one thing people regret skipping, and it takes thirty seconds to check.\n\nFitting it\n\nAssembly is required, but it is light work. Mark your rail positions in pencil, holding each rail up and checking it sits parallel to the cabinet edge. A second pair of hands helps here, though it is manageable alone.\n\nDrive the screws up into the timber with a screwdriver. If the wood is hard, starting a shallow pilot hole with a bradawl makes the job easier and reduces the chance of splitting. Tighten firmly, then test the rail by pulling down on it before you hang anything.\n\nLoad the rails evenly rather than piling everything onto one. Once loaded, give each rail a gentle check a day later and re-tighten anything that has settled.\n\nLooking after it\n\nCare is minimal. Wipe the rails with a soft damp cloth and dry them straight away. Avoid scouring pads, powders and bleach sprays, since those are what dull a brushed surface over time.\n\nThe one habit worth building is letting glasses drain fully before hanging them. Water running down a stem sits on the rail, and trapped moisture is the main enemy of any indoor metal fitting. A quick dry with a tea towel solves it.\n\nEvery few months, press up on each rail and check the screws. Cabinets move slightly with heat and humidity, and a screw that has loosened is much easier to fix before it becomes obvious.\n\nThe short version\n\nThis is three brushed gold rails, each 30.5cm deep, that screw under a cabinet and hold your wine glasses by the foot. Six screws are included and a screwdriver is all you need. It is an indoor fitting in alloy steel, weighing 454 grams for the set, suited to kitchens, dining rooms and home bars.\n\nMeasure your widest glass, check you have solid timber to screw into, and plan your rail spacing before you pick up a screwdriver. Do that and you will get a clear shelf, dust-free stemware and a kitchen corner that looks deliberate instead of crowded.", "llm_summary": "The Gold Wine Glass Rack 30cm by zoohot is a three-pack of under-cabinet hanging stemware rails in a brushed gold finish. Each rail measures 30.5cm deep by 10.8cm wide by 5.1cm high and is made from alloy steel and glass. The set weighs 454 grams and ships with six screws, so installation needs only a screwdriver. Assembly is required. It is an indoor product intended for wine glasses, suited to kitchens, dining rooms and home bars, and is listed as not customisable. Model number is ZYO210907-6. Glasses hang upside down by the foot, freeing shelf space and keeping dust out of the bowls. Country of origin and total weight capacity are not specified in this record.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Consumer Guarantees Act 1993 consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Wine Rack Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://winerack.net.nz/gold-wine-glass-rack-30cm/", "canonical_url": "https://winerack.net.nz/gold-wine-glass-rack-30cm/", "json_url": "https://winerack.net.nz/api/products/gold-wine-glass-rack-30cm.json", "updated_at": "2026-10-10" }, { "id": "large-stemware-rack", "sku": "large-stemware-rack", "title": "Large Stemware Rack Set of 2", "slug": "large-stemware-rack", "price": 84.99, "currency": "NZD", "availability": "in_stock", "category": "wine-glass-racks", "category_label": "Wine Glass Racks", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "0.23 kg", "images": [ "https://winerack.net.nz/dropship-images/wine-glass-racks/large-stemware-rack/main-large-stemware-rack.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/large-stemware-rack/large-stemware-rack-2.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/large-stemware-rack/large-stemware-rack-3.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/large-stemware-rack/large-stemware-rack-4.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/large-stemware-rack/large-stemware-rack-5.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/large-stemware-rack/large-stemware-rack-6.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/large-stemware-rack/large-stemware-rack-7.jpg" ], "description_short": "A two-pack of rust-resistant, black-painted under cabinet glass holders with two rows each, pre-assembled, mounting hardware included, and slim enough to tuck beneath almost any overhang.", "description": "The problem with storing wine glasses\n\nWine glasses are awkward. They are tall, they are fragile, and they refuse to stack. Put them in a cupboard and you lose a whole shelf to a handful of glasses standing in a loose huddle. Leave them on the bench and they collect dust, get knocked over, and eat into the space you actually need for cooking. Put them in a box in the garage and you stop using them altogether, which rather defeats the point of owning nice glassware.\n\nMost of us end up with a compromise that nobody likes. The everyday tumblers get the convenient shelf. The stemware gets shoved to the back, behind the cereal bowls, where retrieving one glass means moving four other things first. That friction is why the good glasses only come out at Christmas.\n\nAn under cabinet glass holder fixes the problem by using space that was never doing anything. The strip of air between your wall cabinets and your bench top is dead zone. Hang a rack there and your glasses live in plain sight, upside down, out of the dust, and within arm's reach of the bench where you pour.\n\nHow a hanging stemware rack works\n\nThe mechanics are simple. The rack screws to the underside of a cabinet, shelf or overhang. It has rows of parallel slots. You slide a glass in so the stem sits in the slot and the base of the glass sits above the rails, which stops it dropping through. The bowl hangs free below.\n\nThat orientation does three useful things at once. Dust lands on the foot of the glass rather than inside the bowl, so glasses stay cleaner between uses. Any residual water drains out instead of pooling, which is why these racks double neatly as a glass drying rack. And because the glasses hang separately, they never clink against each other in a cupboard.\n\nThis particular model is a set of two racks, each with two rows. Each rack measures 43.2 cm wide and 12.7 cm deep, standing 4.1 cm high. The finish is painted black and rust resistant, which is a sensible combination for a space that sees steam from the kettle and splashes from the sink. The listed shelf weight capacity is 5 pounds per rack, and each rack itself weighs about 0.5 pounds.\n\nWho this suits\n\nSmall kitchens benefit most. When bench space is tight, every item you can move off the counter and onto a wall is a win. A two-pack gives you a decent amount of storage without claiming any new floor or bench area.\n\nPeople who entertain regularly get the convenience angle. When friends arrive unannounced, glasses that are already hanging and ready beat glasses buried behind the mixing bowls. There is a real difference between storage that is tidy and storage that is usable.\n\nIt also works for anyone building a home bar. Mount a rack under a buffet shelf, a hutch, a credenza or a bar cart's upper tier, and a plain sideboard starts to look like a proper drinks station. Because the racks are sold in pairs, you can put one in the kitchen and one wherever the drinks actually get poured.\n\nRenters should think about it too, with a caveat. Fitting requires screws, so there will be small holes. Under a cabinet, those holes are out of sight and simple to fill when you move out. Still worth a glance at your lease.\n\nWorking out whether it fits\n\nBefore anything else, measure three things.\n\nFirst, the width of your available run. Each rack needs 43.2 cm of continuous, flat underside. If your cabinet has a decorative lip, a light valance, or a rail along the front edge, measure the flat area behind it.\n\nSecond, the depth. At 12.7 cm deep, the rack will not project much, but check it does not sit so far forward that hanging glasses are in the path of anyone chopping at the bench.\n\nThird, and most importantly, the vertical clearance. Measure from the underside of the cabinet down to the bench. Then measure your tallest glass from foot to rim. Add two or three centimetres so you can lift a glass clear of the slot without catching the rim on the bench. Champagne flutes are usually the tallest thing in the collection, so measure those rather than a standard wine glass.\n\nIf the clearance is short, you have options. Mount the racks under a shelf rather than a cabinet, where there is more open air below. Or hang only your shorter glasses on the rack and keep the flutes elsewhere.\n\nFitting it properly\n\nThe racks arrive pre-mounted in form, with the hardware supplied, so the work is in the positioning rather than any construction.\n\nStart by holding a rack up where you want it and marking the screw positions in pencil. A small spirit level, or even a level app on your phone, is worth the thirty seconds. A rack that sits slightly off-level is obvious once glasses are hanging from it, because the stems will all lean the same way.\n\nCheck what you are screwing into. The underside of a solid timber or quality plywood cabinet base will hold screws well. Thin particleboard is less reliable. If the base feels flimsy, use shorter screws so you do not punch through into the shelf above, or add a strip of timber inside the cabinet as backing.\n\nDrill small pilot holes first. This reduces the chance of splitting the material and makes the screws drive straight. Then fit the rack, snug the screws, and test it empty by giving it a gentle tug before you load any glassware on it.\n\nIf you are fitting both racks in a row, mark out the full run before you drill anything. Even spacing between the two is what makes the finished result look planned rather than improvised.\n\nLiving with it day to day\n\nLoad sensibly. The 5 pound capacity per rack is the number to work from, not the number of empty slots. Heavy crystal adds up faster than you expect, so if your glasses are substantial, use fewer of them per rack and spread the rest across both.\n\nSlide glasses in and out rather than forcing them. The contact point is the stem, which is the strongest part of a wine glass, but the stem is also the bit that snaps if you twist it. A smooth, straight motion is all that is needed.\n\nCleaning is quick. Wipe the rack with a damp cloth when you clean your cabinet fronts, and dry it rather than letting it air dry. Keep abrasive pads and strong solvents away from the painted surface. Grit sitting in the slots is the main thing that causes scratches on stems over time, so an occasional wipe through the slots helps.\n\nEvery few months, run a screwdriver over the fixings. Kitchens expand and contract with heat and humidity, and fasteners loosen a fraction over a year. A quarter turn now and then keeps everything tight.\n\nThe short version\n\nIf you own wine glasses you rarely use because they are inconvenient to reach, this is the fix. Two racks, two rows each, black painted and rust resistant, 43.2 cm wide and slim enough to tuck under most overhangs. Hardware comes in the box and installation takes an afternoon at most.\n\nMeasure your clearance before you order, because that is the one dimension that decides whether it works. Mind the 5 pound capacity. Then enjoy a kitchen where the good glasses are the easy ones to grab.", "llm_summary": "The Large Stemware Rack by Wallniture is a set of two under cabinet wine glass holders for indoor kitchen, bar and dining use. Each rack has two rows of stemware slots and mounts beneath a cabinet, shelf, buffet or hutch. The finish is painted black and rust resistant. Product dimensions are 12.7 cm deep by 43.2 cm wide by 4.1 cm high, with an item weight of 0.5 pounds and a stated shelf weight capacity of 5 pounds. Mounting hardware is included and assembly is required. The UPC is 810001920272. Colour, material and country of origin are not specified in this record, and no dimensions block or customer rating is recorded here.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Consumer Guarantees Act 1993 consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Wine Rack Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://winerack.net.nz/large-stemware-rack/", "canonical_url": "https://winerack.net.nz/large-stemware-rack/", "json_url": "https://winerack.net.nz/api/products/large-stemware-rack.json", "updated_at": "2026-10-10" }, { "id": "under-cabinet-wine-glass-rack-2-pack", "sku": "under-cabinet-wine-glass-rack-2-pack", "title": "Under Cabinet Wine Glass Rack 2 Pack", "slug": "under-cabinet-wine-glass-rack-2-pack", "price": 71.99, "currency": "NZD", "availability": "in_stock", "category": "wine-glass-racks", "category_label": "Wine Glass Racks", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": null, "images": [ "https://winerack.net.nz/dropship-images/wine-glass-racks/under-cabinet-wine-glass-rack-2-pack/main-under-cabinet-wine-glass-rack-2-pack.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/under-cabinet-wine-glass-rack-2-pack/under-cabinet-wine-glass-rack-2-pack-10.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/under-cabinet-wine-glass-rack-2-pack/under-cabinet-wine-glass-rack-2-pack-2.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/under-cabinet-wine-glass-rack-2-pack/under-cabinet-wine-glass-rack-2-pack-3.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/under-cabinet-wine-glass-rack-2-pack/under-cabinet-wine-glass-rack-2-pack-4.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/under-cabinet-wine-glass-rack-2-pack/under-cabinet-wine-glass-rack-2-pack-5.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/under-cabinet-wine-glass-rack-2-pack/under-cabinet-wine-glass-rack-2-pack-6.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/under-cabinet-wine-glass-rack-2-pack/under-cabinet-wine-glass-rack-2-pack-7.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/under-cabinet-wine-glass-rack-2-pack/under-cabinet-wine-glass-rack-2-pack-8.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/under-cabinet-wine-glass-rack-2-pack/under-cabinet-wine-glass-rack-2-pack-9.jpg" ], "description_short": "A two pack of powder coated metal rails that slide glasses in by the stem, drain them upside down and keep the bowls safe from chips and dust.", "description": "The problem with storing stemware flat\n\nWine glasses are badly behaved objects. They are tall, they are fragile, and they refuse to stack. Put six of them on a shelf and they eat a whole level of your cupboard, leaving a band of wasted air above them that nothing else can use. Push them together to save room and the rims start touching, which is exactly where chips begin.\n\nThen there is the drying problem. A washed glass left upright on the bench traps moisture in the bottom of the bowl. Left bowl down on a tea towel, it does not get airflow and holds a damp smell. Neither is great, and both leave glassware sitting on a bench you probably wanted clear.\n\nHanging is the old solution, and it is still the good one. Bars have hung glasses from overhead rails forever because it keeps the bowls apart, lets them drain and dry, and makes it quick to grab one with a free hand. An under cabinet wine glass rack brings that idea into a home kitchen without needing a ceiling frame or a renovation.\n\nHow the rack actually works\n\nThe design is simple on purpose. Two rails run front to back under the cabinet, with a gap between them sized to take the stem of a glass. You tilt the glass, slide the stem into the gap from the open end, and let the base of the glass rest on top of the rails. The bowl now hangs below, with air all around it.\n\nTo get a glass out, you slide it back the way it came. That sideways motion is what makes a hanging wine glass rack safe to use one handed. There is no lifting a heavy bowl over a lip, and no reaching into a dark cupboard hoping you do not knock the glass next to it.\n\nThis set gives you two racks. Each is 34.3 cm deep, 24.3 cm wide and 8.2 cm high, with a metal frame and a gold powder coated finish. The listed shelf weight capacity is 816 grams per rack, which is worth noting before you load it. Assembly is required and the mounting hardware is supplied.\n\nMeasuring before you buy\n\nThree measurements decide whether a rack like this will work for you.\n\nThe first is cabinet depth. Standard wall cabinets are usually deep enough for a 34.3 cm rail, but shallow cabinets, open shelves and some older units are not. Hold a tape against the underside and measure from the back wall to the front edge. If the rack would stick out past the front, it becomes something you walk into.\n\nThe second is clear width. Measure the flat run under the cabinet where nothing is in the way, then subtract space for cabinet doors that swing or any under cabinet lighting already fitted. A 24.3 cm wide rack needs that much clear surface plus a finger of breathing room on each side.\n\nThe third is the drop below the cabinet. Stand under it with a glass in hand and see how much room there is between the cabinet base and the bench or the splashback. The rails add 8.2 cm, and then the glass itself hangs below that. A flute is tall. If the cabinet sits low over a bench, check that you can still slide a glass in without tipping it against the surface below.\n\nChoosing where to put it\n\nPosition matters more than people expect. The convenient spot is not always the right one.\n\nNear the dishwasher or sink is handy because you can hang glasses straight after washing and let them drain. The downside is splash and steam, so keep enough distance that you are not spraying the rails every time you rinse a pot.\n\nOver a bench you use for food prep is less ideal. Flour, oil mist and crumbs drift upward more than you would think, and hanging bowls catch what floats past. A quieter stretch of cabinet, away from the cooktop, keeps glasses cleaner for longer.\n\nNear where you actually pour is the smartest choice of all. If your bottles live in a cupboard by the fridge, put the stemware holder there. A kitchen wine glass storage spot that sits two steps from the corkscrew is the one you will keep using.\n\nFor a home bar or a butler's pantry, the same thinking applies. Mount above the bottles rather than above the ice bucket, and leave clearance for the tallest glass you own.\n\nFitting it properly\n\nMark first, drill second. Hold the rack in place, mark the screw points with a pencil, and check the marks with a level before you touch a tool. If you are mounting both racks, work off one reference line so they end up parallel. A rack that slopes even slightly will let glasses creep toward the low end.\n\nCheck what is above the cabinet base before you drill. In most kitchens it is an empty shelf, but it can be the floor of a cupboard holding plates, and a screw that pokes through will scratch them. Use a fixing length suited to the material thickness.\n\nCabinet bases are often thin particle board or plywood. A pilot hole stops the board splitting and makes the screw bite cleanly. If the base feels flimsy, consider mounting to a solid timber rail or a different cabinet rather than hoping for the best.\n\nOnce the rack is up, load it gradually. Hang one glass, give it a gentle push, and watch for movement. Then fill the rail, respecting the 816 gram capacity and spreading weight evenly rather than loading one end.\n\nKeeping it looking good\n\nPowder coating is tough, but it is not armour. Wipe the rails with a soft damp cloth and dry them right away. Leave the abrasive pads and the bleach sprays for other jobs, because both can dull a coated finish over time.\n\nEvery few months, run a finger along the rails for dust and check the screws are still firm. Timber moves with the seasons and fixings can loosen slightly. A quarter turn now is better than a surprise later.\n\nIf a glass starts to drag going in or out, look for a build up of residue in the channel rather than forcing it. A quick clean usually fixes it.\n\nWho it suits\n\nSmall kitchens benefit most, because the swap frees an entire shelf. Apartment dwellers, share houses and anyone who entertains more often than their cupboard allows all get the same win. People building a home bar glass rack setup like it because the stemware stays visible and reachable.\n\nIt is less suited to households with very heavy crystal, where the weight capacity becomes the limiting factor, and to kitchens with unusually shallow or very low cabinets. It also will not hold stemless glasses or tumblers, since the whole design depends on a stem.\n\nThe short version\n\nAn under cabinet wine glass rack takes a strip of unused space and turns it into useful, tidy storage. This two pack gives you a pair of 34.3 cm by 24.3 cm metal rails in a gold powder coated finish, each rated to 816 grams, with hardware included and assembly required.\n\nMeasure your cabinet depth and clear width first. Pick a spot away from the cooktop but close to where you pour. Mark carefully, pilot your holes, and load the rails evenly. Do that, and your glasses stop crowding a shelf, stop chipping against each other and start drying properly, all while staying within easy reach.", "llm_summary": "The Under Cabinet Wine Glass Rack 2 Pack from FOMANSH is a set of two hanging stemware rails designed to mount to the underside of a kitchen cabinet or shelf. Each rack measures 34.3 cm deep by 24.3 cm wide by 8.2 cm high, is made from glass and metal with a powder coated gold finish, and has a listed shelf weight capacity of 816 grams. It is a single shelf hanging unit for indoor use, intended as a wine glass holder for kitchens and home bars. Assembly is required and the pack includes the hanging shelf components. Country of origin, product weight and warranty are not specified in this record. Glasses are not included.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Consumer Guarantees Act 1993 consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Wine Rack Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://winerack.net.nz/under-cabinet-wine-glass-rack-2-pack/", "canonical_url": "https://winerack.net.nz/under-cabinet-wine-glass-rack-2-pack/", "json_url": "https://winerack.net.nz/api/products/under-cabinet-wine-glass-rack-2-pack.json", "updated_at": "2026-10-10" }, { "id": "wine-glass-rack-4-rows", "sku": "wine-glass-rack-4-rows", "title": "4 Row Under Cabinet Wine Glass Rack", "slug": "wine-glass-rack-4-rows", "price": 63.99, "currency": "NZD", "availability": "in_stock", "category": "wine-glass-racks", "category_label": "Wine Glass Racks", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "454 g", "images": [ "https://winerack.net.nz/dropship-images/wine-glass-racks/wine-glass-rack-4-rows/main-wine-glass-rack-4-rows.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/wine-glass-rack-4-rows/wine-glass-rack-4-rows-10.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/wine-glass-rack-4-rows/wine-glass-rack-4-rows-2.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/wine-glass-rack-4-rows/wine-glass-rack-4-rows-3.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/wine-glass-rack-4-rows/wine-glass-rack-4-rows-4.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/wine-glass-rack-4-rows/wine-glass-rack-4-rows-5.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/wine-glass-rack-4-rows/wine-glass-rack-4-rows-6.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/wine-glass-rack-4-rows/wine-glass-rack-4-rows-7.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/wine-glass-rack-4-rows/wine-glass-rack-4-rows-8.jpg", "https://winerack.net.nz/dropship-images/wine-glass-racks/wine-glass-rack-4-rows/wine-glass-rack-4-rows-9.jpg" ], "description_short": "Four powder-coated hanging rows hold your stemware upside down so glasses stay dust-free, chip-free and ready to pour.", "description": "The problem with storing wine glasses\n\nWine glasses are badly shaped for cupboards. The bowl is wide, the stem is thin and fragile, and the whole thing is top-heavy. Stand a row of them on a shelf and you have used up the full height of that shelf while leaving most of the air above the glasses doing nothing. Stack anything on top and you risk a chip. Push one too far back and you knock over the one in front.\n\nThen there is the dust. A glass standing upright is a small open container with its mouth to the ceiling. Leave it a month between dinner parties and you will want to rinse it before anyone drinks out of it.\n\nA hanging rack fixes both problems at once. The glasses hang upside down by the foot, so the opening faces the bench and stays reasonably clean. The shelf they used to occupy becomes free for plates, bowls or pantry goods. And because each glass sits in its own slot with air around it, nothing is knocking against anything else.\n\nHow a four row rack works\n\nThe design is simple on purpose. The rack is a flat frame with four parallel rails running across it. Between each pair of rails there is a gap wide enough for a wine glass stem but narrower than the foot of the glass. You slide the glass in from the open edge, foot-first, and the two rails hold the foot while the stem and bowl hang below.\n\nThis one measures 6 cm deep, 22.1 cm wide and 6 cm high, and weighs 454 g. It is a compact unit rather than a full-width cabinet insert. That matters for two reasons. First, it fits under a single standard overhead cabinet without looking like a piece of commercial bar equipment. Second, it is light, which makes installation a one-person job.\n\nThe finish is white powder coating. Powder coat goes on as a dry layer and is baked hard, which gives a tougher surface than paint and one that stands up to regular wiping. White is the quietest colour choice for most kitchens because it tends to read as part of the cabinetry rather than an addition to it.\n\nEverything arrives assembled. There is no flat-pack stage, no bag of brackets to decipher. The box holds the rack and the mounting screws.\n\nWho this suits\n\nSmall kitchens benefit the most. If you have one glass cupboard and it is already full, moving six or eight stems underneath buys back a whole shelf. The same logic applies to apartments, granny flats and anywhere the kitchen was designed for a single occupant and is now serving two.\n\nHome bar owners are the other obvious group. A shelf above a bar cart or in a drinks nook with a rack underneath looks deliberate and keeps everything to hand when you are pouring. It is the arrangement most people picture when they think of a proper bar setup, and it costs very little to copy at home.\n\nEntertainers who own more glasses than they use weekly will also notice the difference. Instead of pulling a stack of glasses out of a dark cupboard and rinsing each one, the glasses are already out, already visible and already clean enough to use.\n\nIt is not the right choice if your glasses are stemless. A stemware holder grips the foot, so tumblers and stemless wine glasses have nothing to hold onto. Those still need a shelf.\n\nChoosing the right spot\n\nStart by looking at your glasses rather than your cabinets. Measure the widest foot in your collection and the tallest glass. The foot width tells you how tightly you can pack the rows. The glass height tells you how much clearance you need under the rack.\n\nAdd the 6 cm height of the rack to your tallest glass and measure that total down from the underside of the cabinet. If the result leaves you less than a hand's width above the bench, pick a different cabinet. You want to be able to slide a glass in and out without tilting it awkwardly.\n\nAvoid the area directly above a cooktop. Steam and cooking grease rise, and anything hanging in that zone will need washing far more often. Near the sink is also worth a second thought, though less of an issue. The sweet spot is usually the cabinet closest to where you actually pour drinks, whether that is beside the fridge or at the end of a bench.\n\nCheck what is above the cabinet base before you drill. On most cabinets the base is a solid panel with nothing behind it, but built-in units occasionally have a drawer or a lighting strip tucked in. A quick look inside the cabinet before you start saves an unpleasant surprise.\n\nFitting it properly\n\nHold the rack up where you want it and mark the screw positions with a pencil. Get someone to stand back and check it looks level, since a rack that is 5 mm off will be obvious once glasses are hanging from it.\n\nIf the cabinet base is hard timber or a thick board, drill small pilot holes first. This stops the screws from splitting the material and makes them much easier to drive. Keep the screws short enough that they do not come through the surface inside the cabinet.\n\nDrive each screw until the rack sits flush and does not move when you push it. Do not overtighten, since that can crush the material around the hole and leave the fixing loose. Hang one glass, then two, then the rest, checking as you go that nothing is flexing.\n\nIf you need more capacity, mount a second rack beside the first. Line up the front edges so the two units read as one continuous run, and leave a finger-width gap between them so you can still load glasses from the side.\n\nKeeping it clean\n\nA damp cloth once a fortnight handles most of the job. Kitchen air carries a fine film of cooking oil that settles on everything, and wiping it off early is far easier than scrubbing it off later.\n\nFor anything sticky, warm water with a drop of dish soap on a soft cloth will shift it. What you want to avoid is steel wool, scouring pads and solvent-based cleaners. All three can scratch through powder coating, and once the coating is broken the surface underneath is exposed.\n\nDry the rails after cleaning rather than letting them air dry. It takes ten seconds and keeps water marks off the white finish.\n\nEvery few months, give the mounting screws a quick check. Cabinet doors slam, kitchens vibrate, and screws sometimes work loose over a year or two. A quarter turn with a screwdriver is all it usually takes.\n\nThe short version\n\nThis is a small, light, four-row rack that screws under a cabinet and hangs your wine glasses out of the way. It arrives assembled with screws included, so fitting it takes a few minutes and a screwdriver. The white powder-coated finish wipes clean and keeps a low profile.\n\nIt is 22.1 cm wide, so think of it as a single-cabinet solution rather than a wall-length bar fitting, and add a second unit if you need more room. Measure your tallest glass, pick a spot away from the cooktop, and check the clearance before you drill.\n\nDone well, it is one of those changes you stop noticing within a week, except that your shelf has space on it and your glasses are always ready.", "llm_summary": "The MOCOUM 4 Row Under Cabinet Wine Glass Rack (model SUVELAM, UPC 748323763003) is a hanging stemware holder designed to mount under a kitchen cabinet or shelf. It has four rows, a white powder-coated finish, and measures 6 cm deep by 22.1 cm wide by 6 cm high, weighing 454 g. The listed material is glass with a powder-coated finish. It ships fully assembled with mounting screws included, so only a screwdriver is needed. It is intended for indoor use in kitchens, dining rooms and home bars, holding glasses upside down by the foot to save shelf space and protect stems. Country of origin, exact glass capacity and warranty terms are not specified in this record.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Consumer Guarantees Act 1993 consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Wine Rack Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://winerack.net.nz/wine-glass-rack-4-rows/", "canonical_url": "https://winerack.net.nz/wine-glass-rack-4-rows/", "json_url": "https://winerack.net.nz/api/products/wine-glass-rack-4-rows.json", "updated_at": "2026-10-10" } ] }